Gravity Clicker in Titanium. Choose between 2 styles: Super Gravity (Super-G) or Micro Gravity (Micro-G)
1 - In Stock. Ships within one week!
2 - Please read ALL before you consider purchasing this item, specially the DISCLAIMER down below. By purchasing you understand and agree with all described below. Remember all orders are final, no returns, no refunds.
After years in their works, it’s finally here, the Gravity Clicker by Unquiet Hands!
DROP DAY: All Gravity Clickers will be available here once the countdown above reaches zero.
A completely new class of fidget:
The UQH Gravity Clicker is a super innovative fidget design that delivers a new way of fidgeting, different from everything you may have tried before. For years, we’ve went through countless iterations and prototypes, looking to achieve a great level of haptics that felt not only unique but addictive.
It was a real challenge to get it to where it is and do the things that it can do, and we can now proudly say that we have achieved its “final form”, with proportions that make the Gravity very pocketable, ergonomics that make it a joy to hold on your hands and most importantly, extremely fidgetable!
Click, Flip, Slide, Repeat:
The Gravity allows you to use your finger as a pivot to click it, but you can also flip it and slide it, opening possibilities for lots of cool tricks. Even if you are not into tricks, the Gravity is super intuitive and doesn’t require any skills. You can comfortably use it just as a fidget and you will still feel super satisfied.
Center of Gravity (aka COG):
We have also created an extra part that we call “Center of Gravity” or COG where you won’t need to use your finger to click your Gravity as it replaces your finger entirely for clicks. If you wish to do more than clicks, like flips and so on you would still need to use your finger, but if you plan on just clicking it for a while, you can use only the COG instead of your finger. There are 2 sizes of COGs, one for each Gravity type (more about the two different Gravity types below).
Btw COGs are not included with your Gravity but instead, they are offered as extras that you can purchase along with your Gravity. Unfortunately at this time there is a limited amount of COG available so they may run out soon.
Two kinds of Gravity, many parts, many magnets:
We’ve designed two kinds of Gravity Clickers, the “Super-Gravity” and the “Micro-Gravity” (aka “Super-G” and “Micro-G”). Both Gravity versions are composed of mainly two parts that click together like you’ve seen in the videos and photos, let’s call them Part A and Part B. But these parts A and B are actually composed of 4x CNC machined parts in total, which we can call “sub parts”, 2x “Top Parts”, and 2x “Bottom Parts” in total.
So in summary, a Gravity Clicker has Part A that has 2x sub parts which consists of 1x Top and 1x Bottom, and part B which also has 1x Top and 1x Bottom (total of 4x parts per Gravity).
What’s different between the Super-Gravity and the Micro-Gravity?
Mainly their width and the amount of magnets they have. They both have the exact same side profile, so if you look only to their sides you can’t really tell which one is which. But the key difference is in their width. The thinner version (Micro-G) has a 14.8mm in width and the wider version (the Super-G) has 19.8mm in width, but both versions have a 40mm in length.
Which one should I choose?
Both are fantastic fidgets. However we recommend the Super-G for people with thicker than average fingers, and the Micro-G if you have slimmer fingers. But you can definitely play with either of them independent to your finger anatomy. Also keep in mind that the Super-G does have a stronger magnetic pull than the Micro-G but it's also heavier, so there is a balance there that you have to consider.
How about magnets? How many and how strong?
This can get a bit complex now, but stay with me. The Micro-G has a total of 32x magnets, divided in 2 rows. In it’s tips it has stacked 3x+3x N52 5x3mm magnets which are slipfit in their slots and in its middle it has 4x 5x2 N52 magnets that are glued to their parts (2x in each sub-part), and these cannot be removed. (Please read more down below about customization which may or may not be possible).
The Super-Gravity has a total of 44x magnets, divided in 3 rows in its tips and two in the middle. The tips have stacked 3x+3x+3x N52 5x3mm in one side (Part A), and 3x+3x+3x N35 in the other side (Part B), making them hybrids. We have opted to make the Super-Gs hybrids since we felt that full N52 were making them too strong.
So how can you know which side has N52 (stronger magnets) and which side has N35 (weaker magnets) ? You could simply split them apart and stick them separately to a metal part and see which one has a stronger or weaker pull when you try to take them off, that would be very easy to tell. Alternatively feel free to follow our Youtube tutorial on how to identify magnet strengths. So in the middle of the Super-G you have 4x 5x2 N52 magnets that are glued to the parts, same as the Micro-G version.
Different materials = Different haptic experience:
* Titanium: A heavier material experience. They click fairly loud and slide super satisfyingly. Their very fine glass-blast (GB) finish does not affects the sliding experience, and with enough use parts should start to smooth out from the friction, making it even better to slide.
* Ultem: Durable and sturdy and high efficiency thermoplastic that is used in countless EDC items. It feels very lightweight compared to Titanium. Clicks are more muted and the slide its a bit smoother. It has a medium sound profile on its clicks.
Specs:
Material and Finish: Titanium Glass Blasted
Weight:
Micro Gravity (Ultem): ~25.6g
Super Gravity (Ultem): ~35g
Micro Gravity (Titanium): ~55.4g
Super Gravity (Titanium): ~74.5g
Dimensions:
Micro Gravity: Length 40mm / Width 14.8mm
Super Gravity: Length 40mm / Width 19.8mm
Magnets:
Micro Gravity: Total of 32x Magnets. (Full N52)
Super Gravity: Total of 44x Magnets. (Hybrid, half N35 half N52).
DISCLAIMER! Please make sure to READ ALL before purchasing.
By purchasing you are agreeing with all that is described below:
All pieces we offer are heavily QCed and even though we disclaim some potential small issues below, keep in mind that if there are any imperfections, they should be very minimal since we have strictly checked piece by piece and approved them. We do not sell what we wouldn’t use ourselves and we strive for the highest quality always. We do think though that it’s important to be 100% transparent with our community about our products and inform you with all details, so you can make an informed purchase decision. Please remember, we will not offer refunds, returns or cancelations for any of the reasons described below, all orders are final so please READ BELOW:
* 1) Not recommended for disassembly and customization (Tight Tolerances): The Gravity Clicker was built using tight tolerances to snugly fit its four parts together. It was not really designed to be opened or disassembled once assembled. However it may still be possible to open its parts in order to access its internals and replace its outer magnets or sub-parts (top and bottom) as mostly are slip fit together, but we do not recommend it to be opened in order not to damage it and most importantly we do not guarantee that all units will be able to be disassembled due to slight differences in tolerances, since some parts may be very tightly fit or even pressfit together.
* In that same note, magnets themselves may present slight differences in tolerances so some may be slightly bigger than others, which may make them very tightly fit in their slots. So please be aware that you may or may not be able to remove or swap magnets or parts. We do not consider this as an issue as the Gravity is not meant to be customized or disassembled in the first place. Think of it as a proprietary and closed design. If you plan on customizing or disassembling them please refrain from purchasing as that may or may not be possible to do. If you try, please do at your own risk of damage. Please remember that all orders are final.
* 2) Magnets may present small imperfections like differences in texture or finishing. Some may look more shinny or matte than others or may present tiny bumps or dents and these could be visible through the transparency of Ultem. These slight magnet imperfections are mostly covered with their anti-oxidation plating from factory, which should protect the integrity of the magnet.
* 3) Some Ultem may be slightly and naturally more or less vibrant than others and vary a bit in color hue. Also since Ultem is translucent, it could happen that some Ultem parts may present some machine marks on their inside, which could or could not be visible through it. It is possible that sometimes very small air bubbles could be visible underneath the middle magnets that are glued. That is ok and natural since sometimes the glue can cause some very tiny bubbles but this should not affect the magnet grip in any way.
* 4) Some Ultem may present some very small dark spots blended inside their material. This is a as natural occurrence for this kind of material so we do not consider this as an issue. Please know that we have QCed all pieces and the very few tiny specs of spots we found have passed our QC since they are super tiny.
* 5) Friction and Impact = Inevitable Scuffs & Dents: The Gravity Clicker is a high impact and high friction fidget. Its parts are designed click and rub against each other very strongly, so you should expect its finish to wear with use, which is completely normal. We’ve noticed that with Ultem these marks are not as pronounced, and with Titanium, wear should be more evident. It’s really a fidget to be used to its max, so please know that it will most definitely create wear marks with use. (For your reference, pieces being used in the official Gravity clicker video are our first prototypes, and used heavily for years, so that should give you a good reference on how much wear you should expect with use).
* 6) Top parts may present a tiny gap (Ultem): When you flip your Gravity and their top parts meet together, you may or may not notice that the top parts could present a very tiny gap. This is completely normal due to the machining process of these thermoplastic material. Same could happen in between sub-parts, (like between top and bottom). Rest assured that this will not affect in any way their performance and tricks and all pieces offered have passed our QC.
* 7) Ti and Ultem are strong, but not undamageable: Be aware that although these materials are known for being very resilient and sturdy, they should still be damaged if they are for example dropped on a hard floor from a waist height, so be careful when handling them.
* 8) This product is not a toy and is not intended for kids: The Gravity is a collectible EDC fidget that is intended solely for adults. It's magnetic parts could potentially hurt or "bite" your fingers with misuse so please keep it away from your kids.
Congrats! You’ve reached the end :) If you read all this and you are fine with all that is described in here, we then highly recommend you getting a Gravity Clicker, it is a game changer that we are sure you will cherish for years to come!