{"title":"Accessories","description":"We offer all the essential accessories to upgrade, maintain or customize your fidget spinners. Full ceramic bearings, hybrid ceramic bearings, bearing removal tools, spinner buttons, pouches and more!","products":[{"product_id":"reptilian-hybrid-r188","title":"Reptilian - Hybrid Ceramic R188 (10 Black Balls)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eREPTILIAN\u003c\/span\u003e - 10 BALLS - Si3N4 - HYBRID CERAMIC - R188\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind once you read the characteristics below :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e* Feedback:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eFantastic fine, soothing and pleasant spins.\u003c\/span\u003e\u003cstrong\u003e\u003cbr\u003e* Sound: \u003c\/strong\u003eVery soothing with a gentle whir \"ceramic sound\".\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e* Speed: \u003c\/strong\u003eVery fast and long spin times.\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"4\" in a scale from 0 - 5, being 0 loose, and 5 tight)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* 10 Balls - Ceramic Silicon Nitride (Si3N4)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* Hybrid Ceramic (SS+Ceramic)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* SS Dual Ribbon Cage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eAttention:\u003c\/strong\u003e When using any type of glue to install your bearings, be very careful not to drop any small drop of glue inside the bearing tracks. Also pay attention to small flakes of dry glue once you are installing or uninstalling your bearings as they may fall into the bearing tracks and could potentially ruin your bearing spins. We QC and spin test every bearing before they leave the Shop to make sure they spin nice and freely, and we do not take responsibility for user error, nor issue replacements for this reason. If you have any questions on how to install your bearings please contact us and we would be glad to help!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 Bearing","offer_id":20394991124578,"sku":"","price":4.5,"currency_code":"USD","in_stock":true},{"title":"4 Pack","offer_id":18685603414114,"sku":"","price":17.2,"currency_code":"USD","in_stock":true},{"title":"10 Pack","offer_id":31513047466082,"sku":"","price":41.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/REPTILIAN_-_007.jpg?v=1749464190"},{"product_id":"unquiet-hands-stickers","title":"LIMITED FIRST EDITION - UQH CLASSIC STICKERS","description":"\u003cp\u003e\u003cstrong\u003eLIMITED FIRST EDITION - UQH CLASSIC STICKERS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHelp to support our work getting some of our \"old school” stickers!\u003c\/p\u003e\n\u003cp\u003eAre you an OG in the spinner community? Grab yourself a bit of the UQH history! These are the very first stickers we have ever made, (circa 2017) with our first Original UQH Logo. They are now very limited and very likely won’t be made again. Only a few pieces in stock, once they are gone, they are gone.\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Default Title","offer_id":48806785811,"sku":"","price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/UNQUIET-HANDS-STICKERS.JPG?v=1594636099"},{"product_id":"606-6-zro2-balls-full-ceramic","title":"606 - Full Ceramic (6 Zro2 Balls) Not R188","description":"\u003cp\u003e\u003cstrong\u003e606 - FULL CERAMIC 6 BALLS WHITE BEARING (NOT R188 Bearing)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBeautiful \u003cstrong\u003e606 full ceramic bearing\u003c\/strong\u003e for your fidget hand spinner. It comes with 6 ceramic white balls, white ceramic races and a white ceramic cage. These type of bearings have a long life span. Also, remember that any full ceramic bearing gets better and better with time and use, since the bearing can breakdown and polish itself with use. In other words, you get longer spin time with long term use. Also, notice that full ceramic bearings are not too silent, or super smooth. They are great for some feedback.\u003c\/p\u003e\n\u003cp\u003e* Inner Diameter (ID) \u003cstrong\u003e6mm\u003c\/strong\u003e\u003cbr\u003e* Outer Diameter (OD)\u003cstrong\u003e 17mm\u003cbr\u003e\u003c\/strong\u003e* Thickness \u003cstrong\u003e6mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Default Title","offer_id":49179781779,"sku":"","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/606-6-ZRO2-BALLS-FULL-CERAMIC-03.jpg?v=1660709891"},{"product_id":"r188-ultra-smooth-nylon-cage-bearing","title":"Jupiter - SS R188 (10 Stainless Steel Balls) Nylon","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eJUPITER\u003c\/span\u003e - 10 BALLS - ULTRA NYLON - R188 - 4 OR 10 PACK\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind before purchasing this item :)\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e* Feedback:\u003c\/strong\u003e\u003cspan\u003e Ultra smooth \u003c\/span\u003e\u003cspan\u003espins, \u003cstrong\u003ethe smoothest of all, \u003c\/strong\u003ewith a satisfying soothing feedback.\u003c\/span\u003e\u003cstrong\u003e\u003cbr\u003e* Sound:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eUltra silent\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e* Speed: \u003c\/strong\u003eMedium to long spin times\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"3\" in a scale from 0 - 5, being 0 loose, and 5 tight\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e* 10 Balls - SS Balls, high performance\u003cbr\u003e\u003c\/b\u003e\u003cstrong\u003e* Chrome plated steel outer and inner race\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003cspan\u003e* Molded Nylon Cage\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #2b00ff;\"\u003eNotice 1: This bearing has Stainless Steel balls (SS), but have a chromed plated \"steel\" inner and outer race which may get rust depending on the humidity of your environment. For the best maintenance, do not use water, alcohol or hair dryer in this bearing. Use only a compressed air can (AKA Duster).\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 Bearing","offer_id":20395026317410,"sku":"","price":4.0,"currency_code":"USD","in_stock":true},{"title":"4 Pack","offer_id":13181526966370,"sku":"","price":15.5,"currency_code":"USD","in_stock":true},{"title":"10 Pack","offer_id":13181588832354,"sku":"","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/jupiter3.jpg?v=1594636183"},{"product_id":"round-pouch-for-spinners-black","title":"ROUND POUCH FOR SPINNERS - BLACK","description":"\u003cp\u003e\u003cstrong\u003eROUND POUCH FOR SPINNERS - BLACK\u003c\/strong\u003e\u003c\/p\u003e\nGreat pouch to carry spinners and accessories around, like caps, bearings, bearing removal tool, or even a couple of spinners. This pouch comes with a inside net pocket to keep the spinner in place so it doesn't bounce around when you are walking. Overall great quality for the price.\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e* Material: Rubberized PU\u003cbr\u003e* Inside net pocket to hold your spinner in place\u003cbr\u003e* Water Proof\u003cbr\u003e* Shock Proof\u003cbr\u003e\u003cspan\u003e* Black\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* Weight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e22 grams\u003cbr\u003e\u003cstrong\u003e* Size:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e- External size: 8 x 8 x 3 cm\u003cbr\u003e- Internal size: 7 x 7 x 2,5 cm\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso, check out other pouch colors:\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/pouches\/products\/pouch-for-fidget-spinners-green-zipper\" title=\"GREEN ZIPPER POUCH\"\u003e* GREEN ZIPPER POUCH\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/pouches\/products\/pouch-for-fidget-spinners-orange-zipper\" title=\"ORANGE ZIPPER POUCH\"\u003e* ORANGE ZIPPER POUCH\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/pouches\/products\/pouch-for-fidget-spinners-purple-zipper\" title=\"PURPLE ZIPPER POUCH\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e* PURPLE ZIPPER POUCH\u003c\/span\u003e\u003cbr\u003e\u003c\/a\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/pouches\/products\/pouch-for-fidget-spinners-blue-zipper\" title=\"BLUE ZIPPER POUCH\"\u003e* BLUE ZIPPER POUCH\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Default Title","offer_id":52745592275,"sku":"","price":5.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/ROUND-POUCH-FOR-SPINNERS-BLACK-unquiethands-01.jpg?v=1507385424"},{"product_id":"22-mm-ss-canopy-pressfit-retention","title":"22 MM - SS CANOPY - PRESSFIT \u0026 RETENTION","description":"\u003cp\u003e\u003cstrong\u003eSS CANOPY - 22 MM - PRESSFIT AND RETENTION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e* In Stock. Ships within one week.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Canopy buttons are a classic set of 22mm buttons that were initially designed as to be the OG buttons for our Atrium Spinner. As their popularity grew since they fit so many other spinners out there, we started offering them as individual items. They are really nice and concave, and with a thick groove that adds grip with without compromising on its comfortable touch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: \u003c\/strong\u003eCertificate of Authenticity (COA Card)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\" data-mce-style=\"color: #ff8000;\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eCanopy Buttons Diameter:\u003c\/span\u003e \u003c\/strong\u003e22mm\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eIndividual Button Thickness:\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e* Retention version:\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e 3mm\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/strong\u003e* Pressfit version: 3.9mm\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cbr\u003e\u003cbr data-mce-fragment=\"1\"\u003eFull Buttons Set Thickness:\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e* Retention version:\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e 13mm\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e* Pressfit version: 13mm\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cbr\u003e\u003cbr\u003eThreading:\u003c\/span\u003e\u003c\/strong\u003e \u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\" data-mce-style=\"color: #ff8000;\"\u003e* Dedicated thread (male and female)\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cbr\u003eAvailable Materials:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\" data-mce-style=\"color: #ff8000;\"\u003e* Stainless Steel\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\" data-mce-style=\"color: #ff8000;\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eAvailable Finishes:\u003c\/span\u003e\u003cbr\u003e* \u003c\/strong\u003eMachine Finish (MF)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\" data-mce-style=\"color: #ff8000;\"\u003e* Matte Grey Deep Stonewash (DSW)\u003cbr\u003e\u0026gt; Please notice that the Matte Grey DSW Canopy buttons have a groove that is in Machine Finish, which means the groove will be shinier than the circle in the center and sides.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\" data-mce-style=\"color: #ff8000;\"\u003e* Fine Stonewash (FSW)\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003eButtons Weight:\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e* Retention version: ~15 grams\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e* Pressfit version: ~18 grams\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e Please make sure these will fit in your spinner before purchasing. If you have any questions regarding size, just drop us an email!\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"FSW - RETENTION","offer_id":31405866188898,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"DSW - RETENTION","offer_id":40583834435682,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"FSW - PRESSFIT","offer_id":31405866975330,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"DSW - PRESSFIT","offer_id":40583834828898,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"MF - RETENTION","offer_id":123627241491,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"MF - PRESSFIT","offer_id":123627274259,"sku":"","price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/Canopy_PRESSFIT_SS_22mm_001_web.jpg?v=1715876634"},{"product_id":"uv-adhesive-uv-glue-diy-and-install-your-tritium-vials","title":"UV ADHESIVE - UV GLUE - DIY AND INSTALL YOUR TRIT VIALS","description":"\u003cp\u003e\u003cstrong\u003eUV ADHESIVE - UV GLUE - DIY AND INSTALL YOUR TRIT VIALS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a UV Adhesive (Glue) that cures (hardens and dries) under a \u003ca href=\"https:\/\/unquiethands.com\/products\/uv-flashlight-365nm-for-curing-uv-glue-diy-your-trits?variant=680619147283\" title=\"UV Flashlight\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eUV Flashlight\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e. Perfect to install your tritium vials!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan\u003e\u003cbr\u003eModel: Loctite 3217 UV Adhesive \/ UV Glue\u003cbr\u003eAvailable in 1 cc, 2 cc, or 3 cc plastic bottles\u003cbr\u003eSize of the bottle: 3 cm x 1.5 cm\u003cbr\u003eCure time: 1 minute Under UV Light\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\"HOW DO I INSTALL MY TRITS?\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInstalling trits is super easy. Just follow this simple step by step and you will have your spinner fully \"trited\" in no time!\u003c\/p\u003e\n\u003cp\u003eBefore starting, make sure you have in hand the following items:\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* A Spinner with Trit Slots\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* Trit Vials\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/products\/uv-flashlight-365nm-for-curing-uv-glue-diy-your-trits?variant=680619147283\" title=\"UV Flashlight\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e* 1 UV Flashlight (click here to get one)\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e* 1 UV Adhesive\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e1 - Put 1 small droplet of UV Adhesive \u003c\/b\u003e\u003cb\u003einside your trit slot. You can use a toothpick to collect that droplet first instead of applying directly with the UV Adhesive bottle nozzle. If some UV Adhesive touches the body of the spinner, don't worry, just wipe with a soft tissue. It's really easy to clean.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2 - Place your trit inside the slot, over the UV Adhesive and position it centered in the slot.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3 - Place your UV Flashlight about 5 cm directly over the slot with your tritium and leave the UV Flashlight ON for 1 minute.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4- Done! Now, repeat the same steps for all the other trit slots.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTIPS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e* The UV Adhesive will usually cure in 10 seconds after you apply the UV Light on it, but, we recommend leaving 1 minute to make sure it's really cured and dry.\u003c\/p\u003e\n\u003cp\u003e* Before turning your UV Flashlight on, make sure to take the UV Adhesive bottle away from that light, otherwise the Adhesive may cure inside of the bottle.\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"UV Adhesive - 1 CC","offer_id":680644149267,"sku":"","price":6.0,"currency_code":"USD","in_stock":true},{"title":"UV Adhesive 2 CC","offer_id":680644182035,"sku":"","price":9.5,"currency_code":"USD","in_stock":true},{"title":"UV Adhesive - 3 CC","offer_id":680644214803,"sku":"","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/UV-ADHESIVE-UV-GLUE-DIY-AND-INSTALL-YOUR-TRITIUM-VIALS-unquiethands-02.jpg?v=1522792077"},{"product_id":"22-mm-titanium-polished-cupola-retention","title":"22 MM  - TI - PSW CUPOLA - RETENTION","description":"\u003cp\u003e\u003cstrong\u003eIncluded: coa \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePOLISHED STONEWASHED TITANIUM CUPOLA - 22 MM FOR R188 - RETENTION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese are threaded and were designed for the ATRIUM Spinner but you can use them pretty much in most R188 spinners that will have enough area for a 22 mm caps \/ buttons. They are really nice and concave, with a comfortable touch.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u0026gt; The \u003cstrong\u003eCupola Caps\u003c\/strong\u003e measures 22mm in diameter x 2.8mm in thickness with a nice thin lip that provides more room and depth for its concave design. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e Please make sure these will fit in your spinner. If you have any questions regarding size, just drop us an email.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Ti PSW","offer_id":8212453228642,"sku":"","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/files\/Cupola_V1_RET_Ti_PSW_22mm_001_web.jpg?v=1748847738"},{"product_id":"22-mm-ss-polished-cupola-retention","title":"22 MM - SS - CUPOLA - MF \u0026 POLISHED \u0026 FSW - RETENTION","description":"\u003cp\u003e\u003cstrong\u003eSS CUPOLA - RETENTION - 22 MM FOR R188 - MF \u0026amp; POLISHED \u0026amp; FSW \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese are threaded and were designed for the ATRIUM Spinner but you can use them pretty much in most R188 spinners that will have enough area for a 22 mm caps \/ buttons. They are really nice and concave, with a comfortable touch.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u0026gt; The \u003cstrong\u003eCupola Caps\u003c\/strong\u003e measures 22mm in diameter x 2.8mm in thickness with a nice thin lip that provides more room and depth for its concave design. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncluded: coa \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese are sold in sets of two parts (male and female).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e Please make sure these will fit in your spinner. If you have any questions regarding size, just drop us an email.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"CUPOLA RETENTION - POLISHED","offer_id":8212467843170,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"CUPOLA RETENTION - MF (Machine Finish)","offer_id":39395980640354,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"CUPOLA RETENTION - FSW (Fine Stone Wash)","offer_id":39395980705890,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"CUPOLA RETENTION - DSW(Deep Stone Wash)","offer_id":40590499184738,"sku":"","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/Cupola_V1_RET_SS_Mirror_22mm_001_web_99f73031-3a09-44a3-b030-b20380a0a540.jpg?v=1594636382"},{"product_id":"22-mm-mokuti-collider-retention-pressfit","title":"22 MM - MOKUTI COLLIDER","description":"\u003cp\u003e\u003cstrong\u003eMOKUTI COLLIDER BUTTONS - 22 MM - RETENTION AND PRESSFIT - DESIGNED BY UNQUIET HANDS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis beautiful and exotic Mokuti Collider Button was carefully crafted and heat treated to purple, and blue hues. \u003cspan style=\"color: #000000;\"\u003e\u003cb\u003ePlease notice that colors may be slightly different for each piece, since they are really unique pieces. Some may have lighter or darker blues, and the same goes for purple. Also, notice that the blue or purple, are only the dominant colors, since they may present other secondary colors. Please, check the photos for reference. \u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe\u003cstrong\u003e Collider\u003c\/strong\u003e buttons showcases a surface with 3 large concentric circles that are super comfortable and grippy. It is concave in a way that is just right, not too deep, not too shallow.  Its thickness of 5.3 mm makes this high profile set of buttons a unique and elegant accessory for your favorite spinners. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eCollider \u003c\/strong\u003ebuttons are available in 2 versions, for\u003cstrong\u003e retention and pressfit\u003c\/strong\u003e spinners. No adapters needed. Also, they are slightly different. The \u003cstrong\u003eCollider\u003c\/strong\u003e for retention has a chamfered and c\u003c\/span\u003e\u003cspan class=\"text_exposed_show\"\u003eoncave ridge in it's side, whereas the \u003cstrong\u003eCollider\u003c\/strong\u003e for pressfit has a flat side, so they are easy to identify. \u003cspan\u003e(see the side view picture).\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\"\u003eAll Mokuti Colliders comes with our new UQH Pouch!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eSPECS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eButtons Diameter:\u003c\/strong\u003e 22mm\u003cbr\u003e\u003cstrong\u003eButtons Weight: \u003c\/strong\u003e15 grams\u003cbr\u003e\u003cstrong\u003eButtons Material:\u003c\/strong\u003e Mokuti (3 Alloy)\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e 5.3 mm\u003cbr\u003e\u003cstrong\u003eAvailable for:\u003c\/strong\u003e Pressfit and Retention\u003cbr\u003e\u003cstrong\u003eFor R188 Spinners Only\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eDesigned by Unquiet Hands - UQH\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTICE: Please make sure these will fit in your spinner before your purchase! We won't be able to change it for another type afterwards, since these are unique pieces.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/files\/RETENTION-AND-PRESSFIT2_69dd4f75-1b05-48fd-810f-74c950594dbb_grande.jpg?v=1528305765\" alt=\"pressfit-retention1\"\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/files\/RETENTION-AND-PRESSFIT1_ffb32806-5aa6-44af-bef3-85ea855e9f1b_grande.jpg?v=1528305761\" alt=\"pressfit-retention2\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you have any questions regarding size, just drop us an email.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/b-rpNfn6zDs\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"BLUE PRESSFIT","offer_id":8213671575650,"sku":"","price":0.0,"currency_code":"USD","in_stock":false},{"title":"BLUE RETENTION","offer_id":8213671608418,"sku":"","price":0.0,"currency_code":"USD","in_stock":false},{"title":"PURPLE PRESSFIT","offer_id":8214142287970,"sku":"","price":0.0,"currency_code":"USD","in_stock":false},{"title":"PURPLE RETENTION","offer_id":8214142320738,"sku":"","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/mokuti-001.jpg?v=1528302662"},{"product_id":"22-mm-ss-cupola-v2-pressfit-and-retention","title":"22 MM - SS CUPOLA V2 - PRESSFIT \u0026 RETENTION","description":"\u003cp\u003e\u003cstrong\u003eSS CUPOLA V2 - 22 MM - PRESSFIT AND RETENTION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe new version of the Cupola Buttons is Here! The \u003cstrong\u003eCupola V2 \u003c\/strong\u003ehas a nice concave dish, not so deep and not so flat, but just right. The lip its now more round and smooth, making the experience even more comfortable.\u003c\/p\u003e\n\u003cp\u003eThis is the same buttons that comes stock in our Tungsten Atrium.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e* 22 mm in diameter\u003cbr\u003e* Material: Stainless Steel\u003cbr\u003e* Available for Retention and Pressfit\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: coa \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e Please make sure these will fit in your spinner. If you have any questions regarding size, just drop us an email.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Retention","offer_id":8215161831522,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Pressfit","offer_id":8215163142242,"sku":"","price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/Cupola_V2_RETandPRESSFIT_SS_22mm_001_web_314667c6-6fe5-448b-9f9e-5af1425a5476.jpg?v=1594636390"},{"product_id":"uqh-pouch-edc-storage","title":"UQH POUCH - EDC \u0026 STORAGE - UQH DESIGN","description":"\u003cp\u003e\u003cstrong\u003eUQH POUCH - EDC \u0026amp; STORAGE - DESIGN BY UNQUIET HANDS\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eSPECS:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003e* Around 8 cm x 8 cm\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003e* Elastic Band\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003e* Outer Material: \u003c\/strong\u003e\u003cstrong\u003eStiffened Felt Fabric\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* Inner Pocket Material: Microfiber Cloth\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eUQH Pouch\u003c\/strong\u003e can fit 2 Atriums, or 2 Mini Atriums, or 1 Atrium and 1 Arcade, or 1 XL Atrium or 4 Revolver Knuckle Rollers. Keep in mind that if you plan to carry more than one item, make sure to use a microfiber cloth between your items to avoid scratches.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Default Title","offer_id":8220732031074,"sku":"","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/pouch_007-web.jpg?v=1528310797"},{"product_id":"uqh-leather-pouch-black-edc-storage","title":"UQH LEATHER POUCH - BLACK - UQH DESIGN","description":"\u003cp\u003e\u003cstrong\u003eUQH LEATHER POUCH - BLACK - EDC \u0026amp; STORAGE - DESIGN BY UNQUIET HANDS\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eUQH Leather Pouch\u003c\/strong\u003e is a fantastic sleek and elegant storage for your favorite EDC items such as spinners, knuckle rollers, worry stones and more.\u003c\/p\u003e\n\u003cp\u003eI'ts designed to protect your EDC items against shock and scratches, and to make it easier to carry your best items! This pouch was hand-made using high quality materials, and should last a long time.\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eSPECS:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003e* Around 8 cm x 8 cm\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003e* Material: Split Black Leather\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* Band Material: Black Split Leather\u003cbr\u003e* Inner Pocket Material: Brown Polyester\u003cbr\u003e* Weight: 35 grams\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Default Title","offer_id":8251033124962,"sku":"","price":37.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/UQH-PREMIUM-LEATHER-POUCH-EDC-STORAGE-002_93f16c46-c440-4217-a25f-3cacddc12ab6.jpg?v=1663431514"},{"product_id":"panda-pocket-pouch-edc-storage","title":"PANDA POCKET POUCH - EDC \u0026 STORAGE - UQH DESIGN","description":"\u003cp\u003e\u003cstrong\u003ePANDA POCKET POUCH - EDC \u0026amp; STORAGE - DESIGN BY UQH\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eSPECS:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003e* Around 9.5 cm x 8 cm\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003e* Snap Button (covered inside, so won't touch your spinner)\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003e* Outer Material: \u003c\/strong\u003e\u003cstrong\u003eStiffened Felt Fabric\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* Inner Pocket Material: Polyester\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Default Title","offer_id":12262136545378,"sku":"","price":15.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/small_pouch_001_web.jpg?v=1564060645"},{"product_id":"22-mm-matte-grey-dsw-ss-cupola-v2-pressfit","title":"22 MM - SS - CUPOLA V2 - DSW - PRESSFIT \u0026 RETENTION","description":"\u003cp\u003e\u003cstrong\u003eMATTE GREY DEEP STONEWASHED (DSW) SS CUPOLA V2 - 22 MM - PRESSFIT \u0026amp; RETENTION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe new version of the Cupola Buttons is Here! The \u003cstrong\u003eCupola V2 \u003c\/strong\u003ehas a nice concave dish, not so deep and not so flat, but just right. The lip its now more round and smooth, making the experience even more comfortable.\u003c\/p\u003e\n\u003cp\u003eThis version was Deep Stonewashed to a Matte Dark Grey, which gives it a nice grippy and smooth texture and a premium feel!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e* 22 mm in diameter\u003cbr\u003e* Material: DSW Stainless Steel\u003cbr\u003e* Available for PRESSFIT \u0026amp; RETENTION\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded: coa \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTICE:\u003c\/strong\u003e Please make sure these will fit in your spinner. If you have any questions regarding size, just drop us an email.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"CUPOLA V2 - DSW - RETENTION","offer_id":40590500659298,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"CUPOLA V2 - DSW - PRESSFIT","offer_id":40590500692066,"sku":"","price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/Cupola_V2_pressfit_SS_DSW_22mm_001_web2.jpg?v=1594636507"},{"product_id":"dark-matter-9-balls-full-ceramic-si3n4-r188","title":"Dark Matter - Full Ceramic Black R188 (9 Black Balls)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eDARK MATTER\u003c\/span\u003e - 9 BALLS - SI3N4 - FULL CERAMIC R188 - (Single Piece Not a Pack)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eNotice 1:\u003c\/strong\u003e All orders are final for this product.\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind once you read the characteristics below :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e* Feedback:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eVery strong and pleasant spins.\u003cstrong\u003e\u003cbr\u003e* Sound: \u003c\/strong\u003eStrong and very pleasant whir \"ceramic sound\".\u003cstrong\u003e\u003cbr\u003e* Speed:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eVery fast and long spin times.\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"3\" in a scale from 0 - 5, being 0 loose, and 5 tight)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003e* 9 Balls - Ceramic Silicon Nitride (Si3N4)\u003cbr\u003e* Full Ceramic\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* One-Piece \"Snap In\" PEEK Crown Cage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCeramic bearings can break! In case your bearing breaks during installation or removal, we do not offer replacements or refunds, so be very careful when installing or removing them, and pay attention to the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBe careful when installing or uninstalling ceramic bearings as they may break if your spinner bearing hole is too tight for them. Ceramic is a very brittle and hard material and it has no room to flex or bend. If the bearing hole of your spinner is too tight, i.e if it has too much glue, or dry glue leftover from a previous installation, or if your spinner was machined with a bearing hole slightly smaller than the standard, it is very important that you do not force push your bearing in or out. If you feel a strong resistance when installing or removing your ceramic bearing, stop immediately. You may want to make sure your bearing hole is very clean, with no glue residues before installing your bearing. If glue is necessary then you may apply a little bit of glue in the spinner bearing hole walls (never on the bearing) and try again. If you still feel it’s too tight for your ceramic bearing, do not install it on that spinner. Again, \u003c\/strong\u003e\u003cstrong\u003ewe do not offer replacements or refunds if you break your bearing!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eAttention:\u003c\/strong\u003e When using any type of glue to install your bearings, be very careful not to drop any small drop of glue inside the bearing tracks. Also pay attention to small flakes of dry glue once you are installing or uninstalling your bearings as they may fall into the bearing tracks and could potentially ruin your bearing spins. We QC and spin test every bearing before they leave the Shop to make sure they spin nice and freely, and we do not take responsibility for user error, nor issue replacements for this reason. If you have any questions on how to install your bearings please contact us and we would be glad to help!\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 Bearing","offer_id":39255310958690,"sku":"","price":14.0,"currency_code":"USD","in_stock":true},{"title":"2 Pack","offer_id":39255310991458,"sku":"","price":27.7,"currency_code":"USD","in_stock":true},{"title":"4 Pack","offer_id":40053159952482,"sku":"","price":55.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/DARK_MATTER_-_006.jpg?v=1711628899"},{"product_id":"intergalactic-8-balls-zro2-hybrid-ceramic-r188","title":"Intergalactic - Hybrid C. R188 (8 White Balls) Nylon","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eINTERGALACTIC\u003c\/span\u003e - 8 BALLS - ZrO2 - Molded Nylon Cage - HYBRID CERAMIC - R188\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind once you read the characteristics below :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e* Feedback:\u003c\/strong\u003e\u003cspan\u003e Really smooth \u003c\/span\u003e\u003cspan\u003espins\u003c\/span\u003e\u003cstrong\u003e\u003cbr\u003e* Sound: \u003c\/strong\u003eSilent soothing whir \"ceramic sound\"\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e* Speed: \u003c\/strong\u003eMedium spin times\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"3\" in a scale from 0 - 5, being 0 loose, and 5 tight\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* 8 Balls - Ceramic Zirconia Oxide (ZrO2)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* Hybrid Ceramic (SS+Ceramic)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* Molded Nylon Cage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 BEARING","offer_id":20394997973090,"sku":"","price":4.5,"currency_code":"USD","in_stock":false},{"title":"PACK OF 2","offer_id":40053205041250,"sku":"","price":8.8,"currency_code":"USD","in_stock":false},{"title":"PACK OF 4","offer_id":18685855694946,"sku":"","price":17.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 10","offer_id":40002341404770,"sku":"","price":42.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/INTERGALACTIC_-_002.jpg?v=1749464258"},{"product_id":"pulsar-8-balls-si3n4-hybrid-ceramic-r188","title":"Pulsar - Hybrid Ceramic R188 (8 Black Balls) Nylon","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePULSAR\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e- 8 BALLS - Si3N4 - Molded Nylon Cage - HYBRID CERAMIC - R188\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind once you read the characteristics below :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e* Feedback:\u003c\/strong\u003e\u003cspan\u003e Smooth \u003c\/span\u003e\u003cspan\u003espins\u003c\/span\u003e\u003cstrong\u003e\u003cbr\u003e* Sound: \u003c\/strong\u003eSilent and soothing\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e* Speed: \u003c\/strong\u003eMedium spin times\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"3\" in a scale from 0 - 5, being 0 loose, and 5 tight\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* 8 Balls - Ceramic Silicon Nitride (Si3N4)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* Hybrid Ceramic (SS+Ceramic)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* Molded Nylon Cage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 Bearing","offer_id":20394995515490,"sku":"","price":4.5,"currency_code":"USD","in_stock":true},{"title":"2 Pack","offer_id":40053193375842,"sku":"","price":8.8,"currency_code":"USD","in_stock":true},{"title":"4 Pack","offer_id":18686316445794,"sku":"","price":17.0,"currency_code":"USD","in_stock":true},{"title":"10 Pack","offer_id":39257011093602,"sku":"","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/image_df48de94-4101-4961-8958-6b14bc3c7bf4.jpg?v=1696664129"},{"product_id":"milky-way-9-balls-zro2-full-ceramic-r188","title":"Milky Way - Full C. White R188 (9 White Balls)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMILKY WAY\u003c\/span\u003e - 9 BALLS - FULL CERAMIC ZrO2 - R188 - (Single Piece Not a Pack)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind once you read the characteristics below :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e* Feedback:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSmooth and pleasant spins\u003cstrong\u003e\u003cbr\u003e* Sound: \u003c\/strong\u003ePleasant whir \"ceramic sound\"\u003cstrong\u003e\u003cbr\u003e* Speed:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eFeels fast\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"3\" in a scale from 0 - 5, being 0 loose, and 5 tight)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003e* 9 Balls - Ceramic Zirconia Oxide (ZrO2)\u003cbr\u003e* Full Ceramic\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* One-Piece \"Snap In\" PEEKCrown Cage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCeramic bearings can break! In case your bearing breaks during installation or removal, we do not offer replacements or refunds, so be very careful when installing or removing them, and pay attention to the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBe careful when installing or uninstalling ceramic bearings as they may break if your spinner bearing hole is too tight for them. Ceramic is a very brittle and hard material and it has no room to flex or bend. If the bearing hole of your spinner is too tight, i.e if it has too much glue, or dry glue leftover from a previous installation, or if your spinner was machined with a bearing hole slightly smaller than the standard, it is very important that you do not force push your bearing in or out. If you feel a strong resistance when installing or removing your ceramic bearing, stop immediately. You may want to make sure your bearing hole is very clean, with no glue residues before installing your bearing. If glue is necessary then you may apply a little bit of glue in the spinner bearing hole walls (never on the bearing) and try again. If you still feel it’s too tight for your ceramic bearing, do not install it on that spinner. Again, \u003c\/strong\u003e\u003cstrong\u003ewe do not offer replacements or refunds if you break your bearing!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 BEARING","offer_id":39257023447138,"sku":"","price":14.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 2","offer_id":39257023479906,"sku":"","price":27.75,"currency_code":"USD","in_stock":false},{"title":"PACK OF 4","offer_id":40053156708450,"sku":"","price":55.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/MILKY_WAY_-_005.jpg?v=1749462537"},{"product_id":"lightspeed-10-balls-full-stainless-steel-r188","title":"Lightspeed - SS R188 (10 Stainless Steel Balls)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eLIGHTSPEED\u003c\/span\u003e - 10 BALLS -  FULL STAINLESS STEEL (SS) - R188\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind once you read the characteristics below :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e* Feedback:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eVery smooth and pleasant spins\u003c\/span\u003e\u003cstrong\u003e\u003cbr\u003e* Sound: \u003c\/strong\u003eVery soothing with a gentle whir sound\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e* Speed: \u003c\/strong\u003eFast and long spin times.\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"3\" in a scale from 0 - 5, being 0 loose, and 5 tight)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* 10 Balls - Full Stainless Steel\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* SS Dual Ribbon Cage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eAttention:\u003c\/strong\u003e When using any type of glue to install your bearings, be very careful not to drop any small drop of glue inside the bearing tracks. Also pay attention to small flakes of dry glue once you are installing or uninstalling your bearings as they may fall into the bearing tracks and could potentially ruin your bearing spins. We QC and spin test every bearing before they leave the Shop to make sure they spin nice and freely, and we do not take responsibility for user error, nor issue replacements for this reason. If you have any questions on how to install your bearings please contact us and we would be glad to help!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 Bearing","offer_id":20394984800354,"sku":"","price":3.5,"currency_code":"USD","in_stock":true},{"title":"4 Pack","offer_id":18686449582178,"sku":"","price":12.8,"currency_code":"USD","in_stock":true},{"title":"10 Pack","offer_id":41385817145442,"sku":"","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/LIGHTSPEED_-_003.jpg?v=1723038703"},{"product_id":"event-horizon-9-si3n4-balls-zro2-race-fc-r188","title":"Event Horizon - Full C. White R188 (9 Black Balls)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eEVENT HORIZON\u003c\/span\u003e - 9 BALLS - FULL CERAMIC SI3N4 BALLS AND ZrO2 RACE - R188 - (Single Piece Not a Pack)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind once you read the characteristics below :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e* Feedback:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSoft and pleasant spins\u003cstrong\u003e\u003cbr\u003e* Sound: \u003c\/strong\u003ePleasant and low whir \"ceramic sound\"\u003cstrong\u003e\u003cbr\u003e* Speed:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eMedium spin times\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"4\" in a scale from 0 - 5, being 0 loose, and 5 tight)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003e* 9 Balls - Ceramic Silicon Nitride (Si3N4)\u003cbr\u003e* Ceramic Zirconia Oxide Race \/ Ring (ZrO2)\u003cbr\u003e* Full Ceramic\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* One-Piece \"Snap In\" PEEK Crown Cage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCeramic bearings can break! In case your bearing breaks during installation or removal, we do not offer replacements or refunds, so be very careful when installing or removing them, and pay attention to the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBe careful when installing or uninstalling ceramic bearings as they may break if your spinner bearing hole is too tight for them. Ceramic is a very brittle and hard material and it has no room to flex or bend. If the bearing hole of your spinner is too tight, i.e if it has too much glue, or dry glue leftover from a previous installation, or if your spinner was machined with a bearing hole slightly smaller than the standard, it is very important that you do not force push your bearing in or out. If you feel a strong resistance when installing or removing your ceramic bearing, stop immediately. You may want to make sure your bearing hole is very clean, with no glue residues before installing your bearing. If glue is necessary then you may apply a little bit of glue in the spinner bearing hole walls (never on the bearing) and try again. If you still feel it’s too tight for your ceramic bearing, do not install it on that spinner. Again, \u003c\/strong\u003e\u003cstrong\u003ewe do not offer replacements or refunds if you break your bearing!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 BEARING","offer_id":39255369056354,"sku":"","price":15.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 2","offer_id":39255369089122,"sku":"","price":29.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 4","offer_id":39255369121890,"sku":"","price":56.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/001_09984ad2-3301-4c81-a50a-8eed6aa52dbc.jpg?v=1749464249"},{"product_id":"black-hole-18-balls-si3n4-fc-r188","title":"Black Hole - Cageless Full C. Black R188 (18 Balls)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBLACK HOLE\u003c\/span\u003e - 18 BALLS - FULL CERAMIC SI3N4 - CAGELESS - R188 - (Single Piece Not a Pack)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind once you read the characteristics below :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e* Feedback:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eFantastic unique pleasant spins.\u003cstrong\u003e\u003cbr\u003e* Sound: \u003c\/strong\u003eSuper pleasant whir \"ceramic sound\".\u003cstrong\u003e\u003cbr\u003e* Speed:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eFeels really fast and long spin times.\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"3\" in a scale from 0 - 5, being 0 loose, and 5 tight)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003e* 18 Balls - Ceramic Silicon Nitride (Si3N4)\u003cbr\u003e* Full Black Ceramic\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* No Cage (cageless)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCeramic bearings can break! In case your bearing breaks during installation or removal, we do not offer replacements or refunds, so be very careful when installing or removing them, and pay attention to the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBe careful when installing or uninstalling ceramic bearings as they may break if your spinner bearing hole is too tight for them. Ceramic is a very brittle and hard material and it has no room to flex or bend. If the bearing hole of your spinner is too tight, i.e if it has too much glue, or dry glue leftover from a previous installation, or if your spinner was machined with a bearing hole slightly smaller than the standard, it is very important that you do not force push your bearing in or out. If you feel a strong resistance when installing or removing your ceramic bearing, stop immediately. You may want to make sure your bearing hole is very clean, with no glue residues before installing your bearing. If glue is necessary then you may apply a little bit of glue in the spinner bearing hole walls (never on the bearing) and try again. If you still feel it’s too tight for your ceramic bearing, do not install it on that spinner. Again, \u003c\/strong\u003e\u003cstrong\u003ewe do not offer replacements or refunds if you break your bearing!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003e\u003cspan style=\"color: #2b00ff;\"\u003ePlease be gentle when installing and uninstalling this bearing since it has no cage, so you should always use a proper bearing removal tool for pressfit spinners. All the force must be applied in the outer ring of the bearing. Do not push trough it with your finger or any other tool such as pencil and such or you may damage the bearing!\u003c\/span\u003e \u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Default Title","offer_id":19787280842850,"sku":"","price":18.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/BLACK-HOLE-004.jpg?v=1594636763"},{"product_id":"singularity-18-balls-zro2-fc-r188","title":"Singularity - Cageless Full C. White (18 W. Balls)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSINGULARITY\u003c\/span\u003e - 18 BALLS - FULL CERAMIC ZrO2 - CAGELESS - R188 - (Single Piece Not a Pack)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice 1: All orders are final for this product.\u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice 2: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features may vary drastically from bearing to bearing, they may not all feel the same, and depending on which spinner you are spinning and on each person. Please, keep that in mind before placing an order.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e* Feedback:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSmooth with a satisfying feedback.\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e* Sound: \u003c\/strong\u003eReally quiet for a ceramic bearing.\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"4-5\" in a scale from 0 - 5, being 0 loose, and 5 tight)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003e* 18 Balls - Ceramic Zirconia Oxide (ZrO2)\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e* Full White Ceramic\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* No Cage (cageless)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCeramic bearings can break! In case your bearing breaks during installation or removal, we do not offer replacements or refunds, so be very careful when installing or removing them, and pay attention to the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBe careful when installing or uninstalling ceramic bearings as they may break if your spinner bearing hole is too tight for them. Ceramic is a very brittle and hard material and it has no room to flex or bend. If the bearing hole of your spinner is too tight, i.e if it has too much glue, or dry glue leftover from a previous installation, or if your spinner was machined with a bearing hole slightly smaller than the standard, it is very important that you do not force push your bearing in or out. If you feel a strong resistance when installing or removing your ceramic bearing, stop immediately. You may want to make sure your bearing hole is very clean, with no glue residues before installing your bearing. If glue is necessary then you may apply a little bit of glue in the spinner bearing hole walls (never on the bearing) and try again. If you still feel it’s too tight for your ceramic bearing, do not install it on that spinner. Again, \u003c\/strong\u003e\u003cstrong\u003ewe do not offer replacements or refunds if you break your bearing!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003ePlease be gentle when installing and uninstalling this bearing since it has no cage, so you should always use a proper bearing removal tool for pressfit spinners. All the force must be applied in the outer ring of the bearing. Do not push trough it with your finger or any other tool such as pencil and such or you may damage the bearing!\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 BEARING","offer_id":39257031639138,"sku":"","price":14.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 2","offer_id":39257031671906,"sku":"","price":27.7,"currency_code":"USD","in_stock":false},{"title":"PACK OF 4","offer_id":39257031704674,"sku":"","price":55.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/SINGULARITY-004.jpg?v=1749464237"},{"product_id":"22-mm-ss-vertigo-buttons-high-contrast-low-profile","title":"22 MM - SS VERTIGO BUTTONS - LOW PROFILE","description":"\u003cp\u003e\u003cstrong\u003eIncluded: coa \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e22 MM - SS VERTIGO BUTTONS - HIGH CONTRAST - LOW PROFILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*** Spinner not Included ***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/FoUbqLPAgas\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eExtremely grippy and trippy. If you like grippy buttons this is a great one to have. The Vertigo buttons have a very interesting design and suit very well most spinner designs out there. Also, you get really cool warps of the buttons under a sunlight and a phone camera!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eVertigo \u003c\/strong\u003ebuttons are available in 2 versions, for\u003cstrong\u003e retention and pressfit\u003c\/strong\u003e spinners. No adapters needed. Also, their design are slightly different. The Vertigo\u003cstrong\u003e \u003c\/strong\u003ebuttons for retention has round sides\u003c\/span\u003e\u003cspan class=\"text_exposed_show\"\u003e, and the Vertigo\u003cstrong\u003e \u003c\/strong\u003ebuttons for pressfit has a flat side, so they are easy to identify.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"text_exposed_show\"\u003e\u003cspan\u003e\u003cstrong\u003eNotice:\u003c\/strong\u003e Please make sure these will fit in your spinner before your purchase. If you have any questions regarding size, just drop us an email! :)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eButtons Diameter:\u003c\/strong\u003e 22mm\u003cbr\u003e\u003cstrong\u003eButtons Weight: \u003c\/strong\u003e~ 15.5 grams\u003cbr\u003e\u003cstrong\u003eButtons Material:\u003c\/strong\u003e SS\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e 3.2 mm\u003cbr\u003e\u003cstrong\u003eAvailable for:\u003c\/strong\u003e Pressfit and Retention\u003cbr\u003e\u003cstrong\u003eFor R188 Spinners Only\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eDesigned by Unquiet Hands - UQH\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Pressfit","offer_id":20185490260066,"sku":"","price":45.0,"currency_code":"USD","in_stock":false},{"title":"Retention","offer_id":20185490292834,"sku":"","price":45.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/vertigo_button_low_press_001_web.jpg?v=1594636797"},{"product_id":"22-mm-ss-vertigo-buttons-high-contrast-high-profile","title":"22 MM - SS VERTIGO BUTTONS - HIGH PROFILE","description":"\u003cp\u003e\u003cstrong\u003eIncluded: coa \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e22 MM - SS VERTIGO BUTTONS - HIGH CONTRAST - HIGH PROFILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*** Spinner not Included ***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/FoUbqLPAgas\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eExtremely grippy and trippy. If you like grippy buttons this is a great one to have. The Vertigo buttons have a very interesting design and suit very well most spinner designs out there. Also, you get really cool warps of the buttons under a sunlight and a phone camera!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eVertigo \u003c\/strong\u003ebuttons are available in 2 versions, for\u003cstrong\u003e retention and pressfit\u003c\/strong\u003e spinners. No adapters needed. Also, their design are slightly different. The Vertigo\u003cstrong\u003e \u003c\/strong\u003ebuttons for retention has round sides\u003c\/span\u003e\u003cspan class=\"text_exposed_show\"\u003e, and the Vertigo\u003cstrong\u003e \u003c\/strong\u003ebuttons for pressfit has a flat side, so they are easy to identify.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"text_exposed_show\"\u003e\u003cspan\u003e\u003cstrong\u003eNotice:\u003c\/strong\u003e Please make sure these will fit in your spinner before your purchase. If you have any questions regarding size, just drop us an email! :)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eButtons Diameter:\u003c\/strong\u003e 22mm\u003cbr\u003e\u003cstrong\u003eButtons Weight: \u003c\/strong\u003e~ \u003cstrong\u003e23.5\u003c\/strong\u003e grams\u003cbr\u003e\u003cstrong\u003eButtons Material:\u003c\/strong\u003e SS\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e 5.3 mm\u003cbr\u003e\u003cstrong\u003eAvailable for:\u003c\/strong\u003e Pressfit and Retention\u003cbr\u003e\u003cstrong\u003eFor R188 Spinners Only\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eDesigned by Unquiet Hands - UQH\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Pressfit","offer_id":20185526960226,"sku":"","price":45.0,"currency_code":"USD","in_stock":false},{"title":"Retention","offer_id":20185526992994,"sku":"","price":45.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/vertigo_button_high_ret_001_web.jpg?v=1594636802"},{"product_id":"aron-alpha-gel-japanese-adhesive-for-bearing-installation","title":"Aron Alpha Gel - Japanese Bearing Glue","description":"\u003cp\u003e\u003cstrong\u003eARON ALPHA GEL - JAPANESE ADHESIVE FOR BEARING INSTALLATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eAfter use, wipe the tip with a tissue, close the cap, put the Alpha Gel inside a Ziploc and \u003cspan style=\"text-decoration: underline;\"\u003estore it in the fridge\u003c\/span\u003e. This will expand its lifespan and avoid clogging of the tip!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-fragment=\"1\" data-mce-style=\"color: #ff2a00;\"\u003e\u003cspan style=\"color: #2b00ff;\" data-mce-fragment=\"1\" data-mce-style=\"color: #2b00ff;\"\u003eAttention: When using any type of glue to install your bearings, be very careful not to drop any small drop of glue inside the bearing tracks. Also pay attention to small flakes of dry glue once you are installing or uninstalling your bearings as they may fall into the bearing tracks and could potentially ruin your bearing spins.  We do not take responsibility for user error. If you have any questions on how to install your bearings please contact us and we would be glad to help!\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy is this glue good for spinner enthusiasts? Here are some of the reasons:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• \u003c\/span\u003eIt's a \"non drip gel\", which means it has a nice gel like texture to it, making it easy to apply small consistent droplets in the bearing hole wall of the spinner body.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• \u003c\/span\u003eIt has a friendly curing time, which allows you to work with the gel in the spinner in a more \"human\" way, so you don't need to rush or be afraid that it may dry before you complete the work. And it cures \/ dries in just the right time, so you don't need to wait forever for it to dry. In other words it dries in a minute instead of seconds like other adhesives.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• \u003c\/span\u003eIt has just the right strength, not too weak, not too strong. Meaning, it sticks the bearing in place with the right amount of power required for a spinner. Once it's time to replace your bearing, you can be confident that it should be fairly easy to remove the bearing by using a bearing removal tool, different from other super strong loctites where even with a bearing tool it can get super hard to remove the bearing.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• It is extremely soluble in acetone, even more than other adhesives we've tried, which makes the job of cleaning \/ wiping the bearing hole really easy with a Qtip and acetone.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• \u003c\/span\u003eIt's nozzle is very thin, making it perfect for the application on the bearing hole of the spinner.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• \u003c\/span\u003eEven with the thin nozzle, we've noticed that the Aron gel won't clog the nozzle so easily like other adhesives. To prevent clogging, we highly recommend wiping the excess glue from the nozzle with a tissue every time after use, putting it inside a Ziploc and storing it in the fridge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGENERAL DIRECTIONS:\u003cbr\u003e\u003cbr\u003e1 -\u003c\/strong\u003e Before the first use, twist the plastic cap to its full to pierce the foil seal.\u003cbr\u003e\u003cstrong\u003e2 -\u003c\/strong\u003e Pull out the plastic cap and apply to use.\u003cbr\u003e\u003cstrong\u003e3 -\u003c\/strong\u003e Clean the surface to be bonded.\u003cbr\u003e\u003cstrong\u003e4\u003c\/strong\u003e \u003cstrong\u003e-\u003c\/strong\u003e Apply a small drop of glue on one side of the surface.\u003cbr\u003e\u003cstrong\u003e5 -\u003c\/strong\u003e Bond together with the other surface and press gently.\u003cbr\u003e\u003cstrong\u003e6 -\u003c\/strong\u003e Wipe off excess of glue from the tip and replace the cap tightly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS\u003cbr\u003e\u003cbr\u003e*\u003c\/strong\u003e Contains: Cyanoacrylate.\u003cbr\u003e\u003cstrong\u003e*\u003c\/strong\u003e Eye Irritant.\u003cbr\u003e\u003cstrong\u003e*\u003c\/strong\u003e Bonds Skin Instantly.\u003cbr\u003e\u003cstrong\u003e*\u003c\/strong\u003e NET WT. 3 Grams\u003cbr\u003e\u003cstrong\u003e*\u003c\/strong\u003e Made in Japan\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eBEST MATERIALS TO BE GLUED:\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e* Ceramics, Wood, Rubber, Hard Plastic, Metal\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTIPS:\u003cbr\u003e\u003cbr\u003e1 -\u003c\/strong\u003e Do not apply too much glue because excessive amount will lead to poor results.\u003cbr\u003e\u003cstrong\u003e2 -\u003c\/strong\u003e After every use, stre in cool and dry place.\u003cbr\u003e\u003cstrong\u003e3 -\u003c\/strong\u003e Keep out of reach of children to avoid misuse.\u003cbr\u003e\u003cstrong\u003e4 -\u003c\/strong\u003e If the product gets into eyes, rinse thoroughly with water immediately for 15 minutes and consult a physician for medical treatment.\u003cbr\u003e\u003cstrong\u003e5 -\u003c\/strong\u003e If skin bonding occurs, do not pull. Soak in warm water or apply with acetone-based nail polish remover and gently peel or roll skin apart.\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Default Title","offer_id":20212322369634,"sku":"","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/glue.jpg?v=1594834619"},{"product_id":"quantum-10-balls-zro2-hc-r188","title":"Quantum - Hybrid Ceramic R188 (10 White Balls)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eQUANTUM\u003c\/span\u003e - 10 BALLS - ZrO2 (WHITE BALLS) - HYBRID CERAMIC - R188\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind once you read the characteristics below :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e* Feedback:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSoft feedback with a nice hybrid feel in the background.\u003cstrong\u003e\u003cbr\u003e* Sound: \u003c\/strong\u003eOverall, pretty silent for a hybrid ceramic, with a very characteristic ZrO2 (white balls) pitch in the background.\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e* Speed: \u003c\/strong\u003eVery fast and long spin times.\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"4\" in a scale from 0 - 5, being 0 loose, and 5 tight)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* 10 Balls - Ceramic Zirconia Oxide (ZrO2)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* Hybrid Ceramic (SS+Ceramic)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* SS Dual Ribbon Cage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 Bearing","offer_id":29220666507362,"sku":"","price":4.5,"currency_code":"USD","in_stock":true},{"title":"2 Pack","offer_id":40053161689186,"sku":"","price":8.8,"currency_code":"USD","in_stock":true},{"title":"4 Pack","offer_id":29220666474594,"sku":"","price":17.2,"currency_code":"USD","in_stock":true},{"title":"10 Pack","offer_id":29220694622306,"sku":"","price":41.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/003_6df97ff8-fc48-4c9b-b9fd-6b95d1e775c7.jpg?v=1755526529"},{"product_id":"25-mm-ss-echo-buttons-fsw","title":"ECHO BUTTONS - ZIRC, SS - 25 MM","description":"\u003cp\u003e\u003cstrong\u003eIncluded: coa \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e25 MM -  ECHO BUTTONS\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e-\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eZIRC PSW FLAMED A BIT OIL SLICK OR STAINLESS STEEL FINE STONEWASHED - LOW PROFILE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNOTICE: SHIPS WITHIN ONE WEEK\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eButtons Diameter: \u003c\/strong\u003e25mm\u003cbr\u003e\u003cstrong\u003eButtons Material: \u003c\/strong\u003eStainless Steel\u003cstrong\u003e \u003c\/strong\u003e(FSW), Zirc\u003cbr\u003e\u003cstrong\u003eProfile: \u003c\/strong\u003eLow\u003cstrong\u003e\u003cbr\u003eThickness: \u003c\/strong\u003e3.3 mm\u003cbr\u003e\u003cstrong\u003eButtons Weight: \u003c\/strong\u003e~ 18.5 grams\u003cstrong\u003e\u003cbr\u003eAvailable for: \u003c\/strong\u003ePressfit \/ Slipfit\u003cstrong\u003e\u003cbr\u003eFor R188 Spinners Only\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Zirc PSW Flamed a bit Oil Slick","offer_id":40583850524770,"sku":"","price":70.0,"currency_code":"USD","in_stock":false},{"title":"SS FSW","offer_id":40583850557538,"sku":"","price":40.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/Echo_Button_SS_FSW_001_web_cb86b09d-a4cf-4a75-ac59-b11362fefe56.jpg?v=1594636981"},{"product_id":"23mm-sage-buttons-3-alloy-mokume-etched-polished","title":"23MM SAGE BUTTONS - 3 ALLOY MOKUME - ETCHED \u0026 POLISHED","description":"\u003cp\u003e\u003cstrong\u003eSAGE BUTTONS - 3 ALLOY MOKUME - ETCHED \u0026amp; POLISHED\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNOTICE: SHIPS WITHIN ONE WEEK\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003eATTENTION! \u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"color: #ff0000;\"\u003eSpinner\u003cstrong\u003e NOT\u003c\/strong\u003e included. This is a listing for the Mokume Sage Buttons only.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eButtons Diameter: \u003c\/strong\u003e23mm\u003cbr\u003e\u003cstrong\u003eButtons Material: \u003c\/strong\u003e3 Alloy Mokume - Etched \u0026amp; Polished\u003cbr\u003e\u003cstrong\u003eProfile: \u003c\/strong\u003eLow to Medium\u003cstrong\u003e\u003cbr\u003eThickness: \u003c\/strong\u003e4.0 mm\u003cbr\u003e\u003cstrong\u003eButtons Weight: \u003c\/strong\u003e~ 21.8 grams\u003cstrong\u003e\u003cbr\u003eAvailable for: \u003c\/strong\u003ePressfit \/ Slipfit\u003cstrong\u003e\u003cbr\u003eFor R188 Spinners Only\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Default Title","offer_id":29561570623586,"sku":"","price":100.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/Buttons_only_web_02.jpg?v=1594834550"},{"product_id":"collider-buttons-cu-low-profile","title":"COLLIDER BUTTONS - COPPER - LOW PROFILE","description":"\u003cp\u003e\u003cstrong\u003eCOLLIDER BUTTONS - COPPER - LOW PROFILE (LP) FOR PRESSFIT \/ SLIPFIT\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff9900;\"\u003eCHOSE THE SIZE (DIAMETER) AND METAL IN THE MENU ABOVE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe\u003cstrong\u003e Collider\u003c\/strong\u003e buttons showcases a surface with 3 large concentric circles that are super comfortable and grippy. It is concave in a way that is just right, not too deep, not too shallow and makes this low profile set of buttons an unique and elegant accessory for your favorite spinners. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOLLIDER BUTTONS SPECS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eButtons Diameter:\u003c\/strong\u003e Choose between 20mm, 22mm, 23mm, 25mm\u003cbr\u003e\u003cstrong\u003eButtons Material:\u003c\/strong\u003e Copper\u003cbr\u003e\u003cstrong\u003eAvailable for:\u003c\/strong\u003e Pressfit \/ Slipfit\u003cbr\u003e\u003cstrong\u003eFor R188 Spinners Only\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eDesigned by Unquiet Hands - UQH\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eMake sure the spinner you plan to use the buttons on can accept its diameter and that it’s pressfit \/ slip-fit and not “retention” with the retention ring.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRefunds and Returns will not be accepted in case you purchase the incorrect size, so please confirm with us via email if you have any questions before purchasing.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e“Spacers” aka washers are not included.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"20mm","offer_id":31167377899618,"sku":"","price":40.0,"currency_code":"USD","in_stock":false},{"title":"20mm Polished","offer_id":31171649536098,"sku":"","price":40.0,"currency_code":"USD","in_stock":false},{"title":"22mm","offer_id":31167378030690,"sku":"","price":40.0,"currency_code":"USD","in_stock":false},{"title":"23mm","offer_id":31167378161762,"sku":"","price":40.0,"currency_code":"USD","in_stock":false},{"title":"25mm","offer_id":31167378292834,"sku":"","price":45.0,"currency_code":"USD","in_stock":false},{"title":"25mm Polished","offer_id":31171649372258,"sku":"","price":45.0,"currency_code":"USD","in_stock":false},{"title":"25mm Beadblasted","offer_id":41126492569698,"sku":"","price":45.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/files\/A0DD812F-DEEC-4EB5-A907-8282AD454176.jpg?v=1715774136"},{"product_id":"collider-buttons-titanium-low-profile","title":"COLLIDER BUTTONS - TITANIUM - LOW PROFILE","description":"\u003cp\u003e\u003cstrong\u003eIncluded: coa \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOLLIDER BUTTONS - TITANIUM -  LOW PROFILE (LP) FOR PRESSFIT \/ SLIPFIT\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff9900;\"\u003eCHOSE THE SIZE (DIAMETER) AND METAL IN THE MENU ABOVE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe\u003cstrong\u003e Collider\u003c\/strong\u003e buttons showcases a surface with 3 large concentric circles that are super comfortable and grippy. It is concave in a way that is just right, not too deep, not too shallow and makes this low profile set of buttons an unique and elegant accessory for your favorite spinners. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOLLIDER BUTTONS SPECS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eButtons Diameter:\u003c\/strong\u003e Choose between 22mm, 23mm, 25mm\u003cbr\u003e\u003cstrong\u003eButtons Material:\u003c\/strong\u003e Titanium\u003cbr\u003e\u003cstrong\u003eAvailable for:\u003c\/strong\u003e Pressfit \/ Slipfit\u003cbr\u003e\u003cstrong\u003eFor R188 Spinners Only\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eDesigned by Unquiet Hands - UQH \u003cspan\u003eMake sure the spinner you plan to use the buttons on can accept its diameter and that it’s pressfit \/ slip-fit and not “retention” with the retention ring.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRefunds and Returns will not be accepted in case you purchase the incorrect size, so please confirm with us via email if you have any questions before purchasing.\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eMake sure the spinner you plan to use the buttons on can accept its diameter and that it’s pressfit \/ slip-fit and not “retention” with the retention ring.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRefunds and Returns will not be accepted in case you purchase the incorrect size, so please confirm with us via email if you have any questions before purchasing.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e“Spacers” aka washers are not included.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"20mm","offer_id":32001432223842,"sku":"","price":40.0,"currency_code":"USD","in_stock":false},{"title":"20mm PSW (Polish Stonewashed)","offer_id":31491343810658,"sku":"","price":40.0,"currency_code":"USD","in_stock":false},{"title":"22mm","offer_id":31167440617570,"sku":"","price":40.0,"currency_code":"USD","in_stock":false},{"title":"25mm","offer_id":31167441109090,"sku":"","price":45.0,"currency_code":"USD","in_stock":false},{"title":"25mm PSW (Polish Stonewashed)","offer_id":31418789625954,"sku":"","price":45.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/files\/318C056A-935E-436F-9692-94424C3488B7.jpg?v=1715775531"},{"product_id":"collider-buttons-ss-low-profile","title":"COLLIDER BUTTONS - SS - LOW PROFILE","description":"\u003cp\u003e\u003cstrong\u003eIncluded: coa \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOLLIDER BUTTONS - SS - LOW PROFILE (LP) FOR PRESSFIT \/ SLIPFIT\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff9900;\"\u003eCHOSE THE SIZE (DIAMETER) AND METAL IN THE MENU ABOVE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe\u003cstrong\u003e Collider\u003c\/strong\u003e buttons showcases a surface with 3 large concentric circles that are super comfortable and grippy. It is concave in a way that is just right, not too deep, not too shallow and makes this low profile set of buttons an unique and elegant accessory for your favorite spinners. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOLLIDER BUTTONS SPECS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eButtons Diameter:\u003c\/strong\u003e Choose between 20mm, 22mm, 23mm, 25mm\u003cbr\u003e\u003cstrong\u003eButtons Material:\u003c\/strong\u003e SS\u003cbr\u003e\u003cstrong\u003eAvailable for:\u003c\/strong\u003e Pressfit \/ Slipfit\u003cbr\u003e\u003cstrong\u003eFor R188 Spinners Only\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eDesigned by Unquiet Hands - UQH\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eMake sure the spinner you plan to use the buttons on can accept its diameter and that it’s pressfit \/ slip-fit and not “retention” with the retention ring.\u003cbr\u003eRefunds and Returns will not be accepted in case you purchase the incorrect size, so please confirm with us via email if you have any questions before purchasing.\u003c\/p\u003e\n\u003cp\u003e“Spacers” aka washers are not included.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"25mm","offer_id":31226145538146,"sku":"","price":45.0,"currency_code":"USD","in_stock":false},{"title":"25mm FSW (Fine Stonewash)","offer_id":31167461785698,"sku":"","price":45.0,"currency_code":"USD","in_stock":false},{"title":"25mm BB (Beadblast)","offer_id":40583840399458,"sku":"","price":45.0,"currency_code":"USD","in_stock":false},{"title":"22mm","offer_id":32002428731490,"sku":"","price":40.0,"currency_code":"USD","in_stock":false},{"title":"22mm FSW (Fine Stonewash)","offer_id":32002427945058,"sku":"","price":43.0,"currency_code":"USD","in_stock":false},{"title":"20mm","offer_id":32002430173282,"sku":"","price":40.0,"currency_code":"USD","in_stock":false},{"title":"20mm FSW (Fine Stonewash)","offer_id":32002430140514,"sku":"","price":40.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/Collider_low_pressfit_SS_25_23_22_20mm_001_web_e16c0cca-3fc6-4124-abe6-186a13b3be50.jpg?v=1626680224"},{"product_id":"pond-buttons-ss-low-profile","title":"POND BUTTONS - SS - LOW PROFILE","description":"\u003cp\u003e\u003cstrong\u003ePOND BUTTONS - SS - LOW PROFILE (LP) FOR PRESSFIT \/ SLIPFIT\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003cspan style=\"color: #ff9900;\"\u003eCHOSE THE SIZE (DIAMETER) AND METAL IN THE MENU ABOVE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003ePond\u003c\/strong\u003e is a very simplistic, minimalist and elegant and super comfortable buttons for your spinners! It features a completely round edge and the perfect depth for the best grip possible.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePOND BUTTONS SPECS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eButtons Diameter:\u003c\/strong\u003e Choose between 20mm, 22mm, 23mm, 25mm\u003cbr\u003e\u003cstrong\u003eButtons Material:\u003c\/strong\u003e SS\u003cbr\u003e\u003cstrong\u003eAvailable for:\u003c\/strong\u003e Pressfit \u003cspan\u003e \/ slip-fit \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eFor R188 Spinners Only\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eDesigned by Unquiet Hands - UQH\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eIncluded: coa \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eMake sure the spinner you plan to use the buttons on can accept its diameter and that it’s pressfit \/ slip-fit and not “retention” with the retention ring. “Spacers” aka washers are not available.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"20mm FSW","offer_id":31869775183970,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"20mm","offer_id":31869781246050,"sku":"","price":30.0,"currency_code":"USD","in_stock":false},{"title":"22mm FSW","offer_id":31970694004834,"sku":"","price":35.0,"currency_code":"USD","in_stock":true},{"title":"22mm","offer_id":31970697511010,"sku":"","price":35.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/Pond_low_pressfit_SS_25_23_22_20mm_001_web.jpg?v=1574875994"},{"product_id":"vega-v2-bearing-tool","title":"VEGA V2 - BEARING TOOL","description":"\u003ch4\u003e\u003cspan\u003eVEGA V2 - PRESSFIT BEARING TOOL \u0026amp; BEARING CONTAINER - BY UQH\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/iJXnx7NMqig\" frameborder=\"0\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eAfter we've released the Vega V1, and using extensively for our daily work in the Shop, installing and removing many bearings for our spinners, preparing them for our Drops, we began to take some notes of things that we thought it could be improved in the tool, even though we love the Vega V1, we still could see a great potential for something even better and plenty of room for improvement.We started then designing and 3D modeling a new upgraded tool, which is now known as The \"Vega V2\" Bearing Tool!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\"What's the difference between the Vega V1 and V2?\"\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Vega V2 is a completely redesigned bearing tool with lots of improvements and upgrades if compared with its previews version. Check below all of its new features (you can also read this same infos in the 3D Renders):\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Wider Screw Diameter: \u003c\/strong\u003eThe Screw has now the perfect diameter, which provides less “play” on the bearing, keeping it aligned flush with your spinner during the installation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* A Completely New Body:\u003c\/strong\u003e The Vega V2 has now a much more manageable and secure lower handle (body) with a longer and wider diameter and a new grip design.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* Rounded and Comfy: \u003c\/strong\u003eThe edge under the top handle is now widely rounded, making the entire experience much more comfortable and enjoyable.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* Aluminum 7075, Aircraft Grade:\u003c\/strong\u003e 7075 is a very strong and lightweight aluminum widely used in high-stress and high-pressure structures. It’s also corrosion resistant and non-magnetic.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* Removable Screw:\u003c\/strong\u003e Now you can easily remove and replace the Vega V2 screw (if needed) using a Hex key, so in case it gets damaged you can install a new one. Every Vega V2 comes with a Hex tool and two screws included, one stock and one extra :)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* It’s Lightweight:\u003c\/strong\u003e Weight reduction holes are precisely drilled around the Vega V2 7075 Aluminum body, making it more lightweight and portable.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* It’s for R188 and 608:\u003c\/strong\u003e The Vega V2 comes with 2 black delrins, one for R188 and another one for 608 Bearings. It also comes with two washers in Aluminum, one for each bearing type.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* Upgraded Washer: \u003c\/strong\u003eThe washer has now a wider part in one side, which helps keeping the bearing flush with the spinner surface during installation. It also serves as a “stopper”, making it easier to be removed from the spinner bearing hole after a bearing removal.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* Bearing Container: \u003c\/strong\u003eThe Vega V2 features a chamber at the bottom of the body, with 4 slots that can store up to 20 R188 Bearings in total, or up to 5 Bearings per slot. The 4 slots have the perfect size (not tight, not loose) to hold the bearings in their slots, without bouncing around. The container is closed with a threaded Aluminum cap, which keeps all bearings safe from dust and accessible at all times.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* It’s Grippy and Comfy: \u003c\/strong\u003eEach tool comes with a set of 3 matte black silicone bands, which can be used as a “skin” to not only protect the tool, but also make it even more comfortable and grippy.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* The Finish Matters:\u003c\/strong\u003e With a beadblasted and anodized 7075 Aluminum (Aircraft Grade) surface, combined with the newly added vertical machined lines design, the Vega V2 provides a very confident grip, resilient body and a long-lasting surface to the entire tool.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* V2 vs V1: \u003c\/strong\u003eAlthough bigger than the V1, the V2 is more lightweight due to the reduced mass in material and smarter design, making it more portable, practical and EDC friendly. For comparison the Vega V1 weights around 380 grams in Stainless Steel, while the Vega V2 weights around 270 grams in Aluminum\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003eVEGA V2 BEARING TOOL SPECS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight: \u003c\/strong\u003e~270 grams\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003cspan\u003e 7075 Aluminum Aircraft Grade\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003eFinish:\u003c\/strong\u003e Beadblasted \u0026amp; Anodized\u003cbr\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Dark Grey \/ Gunmetal\u003cbr\u003e\u003cstrong\u003eLaser Etched UQH logo\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eDesigned by Unquiet Hands (UQH)\u003c\/strong\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Default Title","offer_id":31233198784610,"sku":"","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/Vega_V2_01_WEB_SQ.jpg?v=1578235691"},{"product_id":"gofast-10-balls-si3n4-hybrid-r188","title":"GoFast - Hybrid Ceramic R188 (10 Black Balls)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eGOFAST\u003c\/span\u003e - 10 BALLS - Si3N4 (BLACK BALLS) - SS RACE AND CAGE - HYBRID CERAMIC - R188\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind before you purchase this item :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e\u003cspan data-offset-key=\"akj7n-0-0\"\u003eThe GoFast is a premium 10 balls hybrid ceramic that provides a super high-quality and fluid spin feedback to your spins. It manages to be smooth and silent but with a very satisfying “gummy” feedback at the same time. Tolerance is excellent and feels very fast.\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e* 10 Balls - Ceramic Silicon Nitride (Si3N4)\u003cbr\u003e* Hybrid Ceramic (SS Race and Cage + Ceramic Balls)\u003cbr\u003e* SS Crown Cage\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 Bearing","offer_id":31676812165218,"sku":"","price":4.5,"currency_code":"USD","in_stock":true},{"title":"2 Pack","offer_id":40053176729698,"sku":"","price":8.8,"currency_code":"USD","in_stock":true},{"title":"4 Pack","offer_id":31676812197986,"sku":"","price":17.2,"currency_code":"USD","in_stock":true},{"title":"10 Pack","offer_id":31676812230754,"sku":"","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/gofast02.jpg?v=1749464126"},{"product_id":"gimbal-10-balls-ss-ceramic-body-r188","title":"Gimbal - Black Ceramic Races R188 (9 SS Balls)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eGIMBAL\u003c\/span\u003e - 9 SS BALLS + Si3N4 CERAMIC BODY - R188\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind before you purchase this item :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice 2\u003c\/strong\u003e\u003cspan\u003e: Due to the ceramic materials and the manufacturing techniques used to make this specific bearing, it’s is common for the bearing to present small imperfections such as small marks on its body and cage. The PEEK cage slots may have slightly different sizes or offset. However, all these are considered normal characteristics for this bearing, and they should not affect the performance and spin quality of the bearing in any way. UQH does not consider any of these as a issues and no refunds or cancelations are provided for bearing orders, unless the bearing is malfunctioning. More infos can be found in our refund and return policy page.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e\u003cspan data-offset-key=\"17h7p-0-0\"\u003eThe Gimbal is a unique Si3n4 ceramic bearing that comes with 9 stainless steel balls and provides a very satisfying gyroscopic effect with a strong character, yet a feedback that feels gentle and smooth. Tolerance is good and consistent.\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e* 9 Balls - Stainless Steel\u003cbr\u003e* Ceramic Silicon Nitride (Si3N4) Body Construction\u003cbr\u003e* One-Piece \"Snap In\" PEEK Crown Cage\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCeramic bearings can break! In case your bearing breaks during installation or removal, we do not offer replacements or refunds, so be very careful when installing or removing them, and pay attention to the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBe careful when installing or uninstalling ceramic bearings as they may break if your spinner bearing hole is too tight for them. Ceramic is a very brittle and hard material and it has no room to flex or bend. If the bearing hole of your spinner is too tight, i.e if it has too much glue, or dry glue leftover from a previous installation, or if your spinner was machined with a bearing hole slightly smaller than the standard, it is very important that you do not force push your bearing in or out. If you feel a strong resistance when installing or removing your ceramic bearing, stop immediately. You may want to make sure your bearing hole is very clean, with no glue residues before installing your bearing. If glue is necessary then you may apply a little bit of glue in the spinner bearing hole walls (never on the bearing) and try again. If you still feel it’s too tight for your ceramic bearing, do not install it on that spinner. Again, \u003c\/strong\u003e\u003cstrong\u003ewe do not offer replacements or refunds if you break your bearing!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 BEARING","offer_id":39255324950626,"sku":"","price":16.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 2","offer_id":39255324983394,"sku":"","price":31.5,"currency_code":"USD","in_stock":false},{"title":"PACK OF 5","offer_id":40002308735074,"sku":"","price":78.5,"currency_code":"USD","in_stock":false},{"title":"PACK OF 10","offer_id":40002308767842,"sku":"","price":155.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/Gimbal.jpg?v=1749464264"},{"product_id":"tictac-9-ss-balls-zro2-ceramic-body-r188","title":"TicTac - White Ceramic Races R188 (9 SS Balls)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eTICTAC\u003c\/span\u003e - 9 SS BALLS + ZRO2 CERAMIC BODY - R188\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind before you purchase this item :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e\u003cspan data-offset-key=\"3rnbg-0-0\"\u003eWith a super unique and solid feedback, the TicTac is a ZrO2 ceramic bearing with 9 stainless steel balls that feels fantastic in virtually any spinner. It has a special “whir” that you won't experience in any other bearing and with a good tolerance.\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e* 9 Balls - Stainless Steel\u003cbr\u003e* Ceramic Zirconia Oxide (ZrO2) Body Construction\u003cbr\u003e* One-Piece \"Snap In\" PEEK Crown Cage\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCeramic bearings can break! In case your bearing breaks during installation or removal, we do not offer replacements or refunds, so be very careful when installing or removing them, and pay attention to the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBe careful when installing or uninstalling ceramic bearings as they may break if your spinner bearing hole is too tight for them. Ceramic is a very brittle and hard material and it has no room to flex or bend. If the bearing hole of your spinner is too tight, i.e if it has too much glue, or dry glue leftover from a previous installation, or if your spinner was machined with a bearing hole slightly smaller than the standard, it is very important that you do not force push your bearing in or out. If you feel a strong resistance when installing or removing your ceramic bearing, stop immediately. You may want to make sure your bearing hole is very clean, with no glue residues before installing your bearing. If glue is necessary then you may apply a little bit of glue in the spinner bearing hole walls (never on the bearing) and try again. If you still feel it’s too tight for your ceramic bearing, do not install it on that spinner. Again, \u003c\/strong\u003e\u003cstrong\u003ewe do not offer replacements or refunds if you break your bearing!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 BEARING","offer_id":39255351525474,"sku":"","price":16.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 2","offer_id":39255351558242,"sku":"","price":31.5,"currency_code":"USD","in_stock":false},{"title":"PACK OF 5","offer_id":40002321645666,"sku":"","price":78.5,"currency_code":"USD","in_stock":false},{"title":"PACK OF 10","offer_id":40002321678434,"sku":"","price":155.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/TicTac1.jpg?v=1749464243"},{"product_id":"cosmology-9-zro2-balls-fc-r188","title":"Cosmology - Full C. White R188 (9 White Balls) PTFE","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eCOSMOLOGY\u003c\/span\u003e - 9 BALLS - FULL CERAMIC ZrO2 - R188 - (Single Piece Not a Pack)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind once you read the characteristics below :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e* Feedback:\u003c\/strong\u003e\u003cspan\u003e Very \u003c\/span\u003eSmooth and satisfying spins\u003cstrong\u003e\u003cbr\u003e* Sound: \u003c\/strong\u003eQuiet with a pleasant ceramic feedback\u003cstrong\u003e\u003cbr\u003e* Speed:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eFeels fast\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"4\" in a scale from 0 - 5, being 0 loose, and 5 tight)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003e* 9 Balls - Ceramic Zirconia Oxide (ZrO2)\u003cbr\u003e* Full Ceramic\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* One-Piece \"Snap In\" PTFE Crown Cage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCeramic bearings can break! In case your bearing breaks during installation or removal, we do not offer replacements or refunds, so be very careful when installing or removing them, and pay attention to the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBe careful when installing or uninstalling ceramic bearings as they may break if your spinner bearing hole is too tight for them. Ceramic is a very brittle and hard material and it has no room to flex or bend. If the bearing hole of your spinner is too tight, i.e if it has too much glue, or dry glue leftover from a previous installation, or if your spinner was machined with a bearing hole slightly smaller than the standard, it is very important that you do not force push your bearing in or out. If you feel a strong resistance when installing or removing your ceramic bearing, stop immediately. You may want to make sure your bearing hole is very clean, with no glue residues before installing your bearing. If glue is necessary then you may apply a little bit of glue in the spinner bearing hole walls (never on the bearing) and try again. If you still feel it’s too tight for your ceramic bearing, do not install it on that spinner. Again, \u003c\/strong\u003e\u003cstrong\u003ewe do not offer replacements or refunds if you break your bearing!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 BEARING","offer_id":39257009881186,"sku":"","price":15.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 2","offer_id":39257009913954,"sku":"","price":29.5,"currency_code":"USD","in_stock":false},{"title":"PACK OF 5","offer_id":39257009946722,"sku":"","price":73.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 10","offer_id":40002531295330,"sku":"","price":140.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 20","offer_id":40002531328098,"sku":"","price":240.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/Cosmology-R188-Bearing-02.jpg?v=1593420242"},{"product_id":"nibiru-2-0-10-zro2-balls-ss-cage-r188","title":"Nibiru 2.0 - Hybrid Ceramic R188 (10 White Balls)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eNIBIRU 2.0\u003c\/span\u003e - 10 BALLS - ZRO2 (WHITE BALLS) - SS RACE AND CAGE - HYBRID CERAMIC - R188\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind before you purchase this item :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e\u003cspan data-offset-key=\"akj7n-0-0\"\u003eThe Nibiru 2.0 is a premium 10 balls hybrid ceramic that provides a super high-quality and fluid spin feedback to your spins. It manages to be smooth and quiet but with a very satisfying and glassy feedback at the same time. Tolerance is excellent.\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e* 10 Balls - Ceramic Zirconium Dioxide (ZrO2)\u003cbr\u003e* Hybrid Ceramic (SS Race and Cage + Ceramic Balls)\u003cbr\u003e* SS Crown Cage\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 Bearing","offer_id":31954695848034,"sku":"","price":4.5,"currency_code":"USD","in_stock":true},{"title":"2 Pack","offer_id":40053172469858,"sku":"","price":8.8,"currency_code":"USD","in_stock":true},{"title":"4 Pack","offer_id":31954695880802,"sku":"","price":17.2,"currency_code":"USD","in_stock":true},{"title":"10 Pack","offer_id":31954695913570,"sku":"","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/nibiru-20-uqh-01.jpg?v=1663489879"},{"product_id":"bearings-sample-pack","title":"UQH Bearings Sample Pack (23pk) - 10%OFF","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eUQH BEARINGS SAMPLE PACK\u003c\/span\u003e - THIS CURRENT SAMPLE PACK INCLUDES 23 DIFFERENT BEARINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cb style=\"color: #0000ff;\"\u003eNotice: The image in this photo is only illustrative since the bearings available in this Sample Pack are constantly changing with the ones we currently have available. (Sometimes we may offer 30 pieces in the pack, sometimes less or more). We are often adding or removing bearings from this pack, so prices also fluctuate. Make sure to always check which bearings are available in this pack in the list bellow.\u003cbr\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cb\u003eThis Current UQH Bearings Sample Pack includes 23 different R188 UQH Bearings, a mix of stainless steel, hybrid ceramics and full ceramics. By getting this sample pack you save 10%OFF on every single bearing from the list below.\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eThis UQH Bearings Sample Pack is perfect for those who want to try different bearings and feedback flavors :) Get to know which bearings you like the most so when youn place an order in the future you know your favorites!\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAll bearings come tagged with their names so you can easily identify each one once you receive them ;)\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTHE 23 BEARINGS INCLUDED IN THIS SAMPLE PACK ARE AS FOLLOWS:\u003cbr\u003e\u003cbr\u003eFULL CERAMICS:\u003c\/b\u003e\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e1x DARK MATTER\u003c\/strong\u003e\u003cbr\u003e\u003cb\u003e1x DARK ENERGY\u003cbr\u003e1x SOLAR FLARE\u003cbr\u003e\u003c\/b\u003e\u003cb\u003e1x HOT FUSION\u003cbr\u003e1x CALLISTO\u003cbr\u003e1x EUROPA\u003cbr\u003e1x AMALTHEA\u003cbr\u003e1x THEBE\u003cbr\u003e\u003c\/b\u003e\u003cb\u003e1x SOLAR ECLIPSE ZrO2\u003cbr\u003e1x LUNAR ECLIPSE Si3N4\u003cbr\u003e\u003cbr\u003eHYBRID CERAMICS:\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e1x REPTILIAN\u003cbr\u003e1x QUANTUM\u003cbr\u003e1x OORT CLOUD\u003cbr\u003e1x WHITE DWARF\u003cbr\u003e1x GOFAST\u003cbr\u003e1x NIBIRU 2.0\u003cbr\u003e1x NEPTUNE\u003cbr\u003e\u003c\/b\u003e\u003cb\u003e1x SATURN\u003cbr\u003e1x PULSAR\u003cbr\u003e\u003c\/b\u003e\u003cb\u003e1x MERCURY\u003cbr\u003e1x DEEP SPACE\u003cbr\u003e1x PLUTO\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSTAINLESS STEEL (SS):\u003cbr\u003e\u003c\/b\u003e\u003cb\u003e\u003cbr\u003e1x JUPITER (SS with Nylon Cage)\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\u003cbr\u003e\u003cbr\u003eWarning! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCeramic bearings can break! In case your bearing breaks during installation or removal, we do not offer replacements or refunds, so be very careful when installing or removing them, and pay attention to the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBe careful when installing or uninstalling ceramic bearings as they may break if your spinner bearing hole is too tight for them. Ceramic is a very brittle and hard material and it has no room to flex or bend. If the bearing hole of your spinner is too tight, i.e if it has too much glue, or dry glue leftover from a previous installation, or if your spinner was machined with a bearing hole slightly smaller than the standard, it is very important that you do not force push your bearing in or out. If you feel a strong resistance when installing or removing your ceramic bearing, stop immediately. You may want to make sure your bearing hole is very clean, with no glue residues before installing your bearing. If glue is necessary then you may apply a little bit of glue in the spinner bearing hole walls (never on the bearing) and try again. If you still feel it’s too tight for your ceramic bearing, do not install it on that spinner. Again, \u003c\/strong\u003e\u003cstrong\u003ewe do not offer replacements or refunds if you break your bearing!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Default Title","offer_id":39257115295842,"sku":"","price":191.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/files\/UQH-bearings-sample-pack-r188-full-ceramic-hybrid-ceramic.png?v=1792205393"},{"product_id":"zero-g-r188","title":"Zero-G - SS R188 (10 Stainless Steel Balls)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eZERO-G\u003c\/span\u003e - 10 BALLS - SS BALLS - SS RACE AND CAGE - R188\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind before you purchase this item :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e\u003cspan data-offset-key=\"akj7n-0-0\"\u003eThe Zero-G is a premium build R188 Bearing with 10 balls in Stainless Steel with a very very good construction, smooth performance, low sound, fast and tight tolerance. The Zero-G is a cousin of the GoFast and Nibiru 2.0, so if you like those bearings you should definitely try adding these to your bearing collection.\u003c\/span\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e* Feedback:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eSmooth and premium spin feel.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Sound: \u003c\/strong\u003eLow sound, but not muted, which is nice :)\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e* Speed: \u003c\/strong\u003eFeels fast.\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"5\" in a scale from 0 - 5, being 0 loose, and 5 tight)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e* 10 Balls - Stainless Steel (SS)\u003cbr\u003e* SS Race and Cage\u003cbr\u003e* SS Crown Cage (excellent construction)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 Bearing","offer_id":39344327753826,"sku":"","price":4.0,"currency_code":"USD","in_stock":true},{"title":"4 Pack","offer_id":39344327786594,"sku":null,"price":15.5,"currency_code":"USD","in_stock":true},{"title":"10 Pack","offer_id":39344327819362,"sku":null,"price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/zero-g-r188-uqh-bearing-02.jpg?v=1660705857"},{"product_id":"deep-space-r188zz","title":"Deep Space - Hybrid C. Shielded R188ZZ (10 B. Balls)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eDEEP SPACE\u003c\/span\u003e - SHIELDED - 10 BALLS - Si3N4 - HYBRID CERAMIC - R188ZZ\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind once you read the characteristics below :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Deep Space is our first offering of a R188ZZ type of bearing which has a protection on both sides (shields) which covers the races, cage and balls helping reduce the chances of dust or lint falling inside. The good thing is that if that ever happens, it can still be cleaned successfully with a compressed air can (duster) too. It has a very satisfying whir, with a nice touch of a satisfying \"metallic\" low sound, and a very nice haptic feedback. Tolerance is excellent.\u003cbr\u003e\u003cbr\u003e* Feedback:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eUnique and very satisfying haptic.\u003cstrong\u003e\u003cbr\u003e* Sound: \u003c\/strong\u003eNice and low \"ceramic sound\" with a touch of a sweet \"metallic\" like sound.\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e* Speed: \u003c\/strong\u003eFeels fast.\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"5\" in a scale from 0 - 5, being 0 loose, and 5 tight)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e* R188ZZ - Shielded both sides with SS.\u003cbr\u003e* 10 Balls - Ceramic Silicon Nitride (Si3N4 aka Black Balls)\u003cbr\u003e* Hybrid Ceramic (SS+Ceramic)\u003cbr\u003e* SS Dual Ribbon Cage\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 Bearing","offer_id":39344331587682,"sku":"","price":4.5,"currency_code":"USD","in_stock":true},{"title":"4 Pack","offer_id":39344331554914,"sku":"","price":17.2,"currency_code":"USD","in_stock":true},{"title":"10 Pack","offer_id":39344331620450,"sku":"","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/deep-space-r188-uqh-bearing-01.jpg?v=1755524960"},{"product_id":"moon-8-si3n4-balls-zro2-r188","title":"Moon - Full Ceramic White R188 (8 Black Balls)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMOON\u003c\/span\u003e - 8 BALLS - FULL CERAMIC (FC) SI3N4 BALLS AND ZRO2 RACES - R188 - (Single Piece Not a Pack)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based only on our personal opinions. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind once you read the characteristics below :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e* Feedback:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eInteresting and gentle feedback, feels soft for a FC.\u003cstrong\u003e\u003cbr\u003e* Sound: \u003c\/strong\u003eMedium to low sound, but you can still hear it going.\u003cbr\u003e\u003cspan\u003e* \u003cstrong\u003eSpeed\u003c\/strong\u003e: Feels lightweight and fast.\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"5\" in a scale from 0 - 5, being 0 loose, and 5 tight.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Full Ceramic (FC)\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e* 8 Balls - Ceramic Silicon Nitride (Si3N4)\u003cbr\u003e* Thin and lightweight Ceramic Zirconia Oxide Race \/ Ring (ZrO2)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* Semi-Enclosed PEEK Cage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCeramic bearings can break! In case your bearing breaks during installation or removal, we do not offer replacements or refunds, so be very careful when installing or removing them, and pay attention to the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBe careful when installing or uninstalling ceramic bearings as they may break if your spinner bearing hole is too tight for them. Ceramic is a very brittle and hard material and it has no room to flex or bend. If the bearing hole of your spinner is too tight, i.e if it has too much glue, or dry glue leftover from a previous installation, or if your spinner was machined with a bearing hole slightly smaller than the standard, it is very important that you do not force push your bearing in or out. If you feel a strong resistance when installing or removing your ceramic bearing, stop immediately. You may want to make sure your bearing hole is very clean, with no glue residues before installing your bearing. If glue is necessary then you may apply a little bit of glue in the spinner bearing hole walls (never on the bearing) and try again. If you still feel it’s too tight for your ceramic bearing, do not install it on that spinner. Again, \u003c\/strong\u003e\u003cstrong\u003ewe do not offer replacements or refunds if you break your bearing!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 BEARING","offer_id":39905797439586,"sku":"","price":12.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 2","offer_id":39905797472354,"sku":"","price":23.5,"currency_code":"USD","in_stock":false},{"title":"PACK OF 4","offer_id":39905797505122,"sku":null,"price":45.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 5","offer_id":40002271838306,"sku":"","price":55.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 10","offer_id":40002576285794,"sku":"","price":100.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/MOON-8-SI3N4-BALLS-ZRO2-R188-001.jpg?v=1658143934"},{"product_id":"sol-8-zro2-balls-zro2-r188","title":"Sol - Full Ceramic White R188 (8 White Balls)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSOL\u003c\/span\u003e- 8 BALLS - FULL CERAMIC (FC) ZRO2 BALLS AND ZRO2 RACES - R188 - (Single Piece Not a Pack)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based only on our personal opinions. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind once you read the characteristics below :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e* Feedback:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSuper satisfying feedback, feels soft for a FC.\u003cstrong\u003e\u003cbr\u003e* Sound:\u003c\/strong\u003e Fairly quiet with a glassy satisfying background.\u003cbr\u003e\u003cspan\u003e* \u003cstrong\u003eSpeed\u003c\/strong\u003e: Feels very fast.\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"5\" in a scale from 0 - 5, being 0 loose, and 5 tight.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Full Ceramic (FC)\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e* 8 Balls - Ceramic Zirconia Oxide (ZrO2)\u003cbr\u003e* Thin and lightweight Ceramic Zirconia Oxide Race \/ Ring (ZrO2)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* Semi-Enclosed PEEK Cage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCeramic bearings can break! In case your bearing breaks during installation or removal, we do not offer replacements or refunds, so be very careful when installing or removing them, and pay attention to the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBe careful when installing or uninstalling ceramic bearings as they may break if your spinner bearing hole is too tight for them. Ceramic is a very brittle and hard material and it has no room to flex or bend. If the bearing hole of your spinner is too tight, i.e if it has too much glue, or dry glue leftover from a previous installation, or if your spinner was machined with a bearing hole slightly smaller than the standard, it is very important that you do not force push your bearing in or out. If you feel a strong resistance when installing or removing your ceramic bearing, stop immediately. You may want to make sure your bearing hole is very clean, with no glue residues before installing your bearing. If glue is necessary then you may apply a little bit of glue in the spinner bearing hole walls (never on the bearing) and try again. If you still feel it’s too tight for your ceramic bearing, do not install it on that spinner. Again, \u003c\/strong\u003e\u003cstrong\u003ewe do not offer replacements or refunds if you break your bearing!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 BEARING","offer_id":39965732864098,"sku":"","price":12.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 2","offer_id":39965732896866,"sku":"","price":23.5,"currency_code":"USD","in_stock":false},{"title":"PACK OF 4","offer_id":39965732929634,"sku":null,"price":45.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 5","offer_id":40002275147874,"sku":"","price":55.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 10","offer_id":40002575597666,"sku":"","price":100.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/sol-8-zro2-balls-zro2-r188-007.jpg?v=1660370017"},{"product_id":"supercluster-2-0-8-zro2-balls-r188","title":"Supercluster 2.0 - Hybrid Ceramic R188 (8 Balls) PTFE","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSUPERCLUSTER 2.0\u003c\/span\u003e - 8 BALLS - ZrO2 - HYBRID CERAMIC - R188\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind once you read the characteristics below :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIf compared with the Supercluster (V1) this is more quiet and feels smoother.\u003cbr\u003e\u003c\/b\u003e\u003cstrong\u003e\u003cbr\u003e* Feedback:\u003c\/strong\u003e\u003cspan\u003e Smooth and very satisfying spin feedback.\u003cbr\u003e\u003c\/span\u003e\u003cstrong\u003e* Sound: \u003c\/strong\u003eLow glassy sound.\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003e* Speed: \u003c\/strong\u003eFeels fast and lightweight.\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"4\" in a scale from 0 - 5, being 0 loose, and 5 tight\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* 8 Balls - Ceramic Zirconia Oxide (ZrO2)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* Hybrid Ceramic (SS+Ceramic)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* One-Piece \"Snap In\" PTFE Crown Cage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 BEARING","offer_id":40031697895522,"sku":"","price":4.5,"currency_code":"USD","in_stock":false},{"title":"PACK OF 2","offer_id":40053199798370,"sku":"","price":8.8,"currency_code":"USD","in_stock":false},{"title":"PACK OF 4","offer_id":40031697862754,"sku":"","price":17.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 10","offer_id":40031697928290,"sku":"","price":42.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/image_63cc29ac-0b45-4489-a119-6bc5d5ae9bef.jpg?v=1662979151"},{"product_id":"antimatter-9-si3n4-balls-r188","title":"Antimatter - Black Ceramic Body (9 Black Balls) SS Cage","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eANTIMATTER\u003c\/span\u003e - 9 BALLS - SI3N4 - FULL CERAMIC R188 - STAINLESS STEEL CAGE (Single Piece Not a Pack)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind once you read the characteristics below :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice 2\u003c\/strong\u003e: Due to the ceramic materials and the manufacturing techniques used to make this specific bearing, it’s is common for the bearing to present small imperfections such as small marks on its body and cage. These are considered normal characteristics for this bearing, and they should not affect the performance and spin quality of the bearing in any way. UQH does not consider these potential small imperfections as a issues and no refunds or cancelations are provided for bearing orders, unless the bearing is malfunctioning. More infos can be found in our refund and return policy page.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003cbr\u003e\u003cbr\u003e* Feedback:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eStrong with a “metallic and glassy” feedback signature.\u003cstrong\u003e\u003cbr\u003e* Sound: \u003c\/strong\u003eStrong and very pleasant whir \"metallic \/ glassy sound\".\u003cstrong\u003e\u003cbr\u003e* Speed:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eFeels fast and lightweight.\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"3\" in a scale from 0 - 5, being 0 loose, and 5 tight)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003e* 9 Balls - Ceramic Silicon Nitride (Si3N4)\u003cbr\u003e* Full Ceramic\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* SS Double Ribbon Cage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning! \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCeramic bearings can break! In case your bearing breaks during installation or removal, we do not offer replacements or refunds, so be very careful when installing or removing them, and pay attention to the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBe careful when installing or uninstalling ceramic bearings as they may break if your spinner bearing hole is too tight for them. Ceramic is a very brittle and hard material and it has no room to flex or bend. If the bearing hole of your spinner is too tight, i.e if it has too much glue, or dry glue leftover from a previous installation, or if your spinner was machined with a bearing hole slightly smaller than the standard, it is very important that you do not force push your bearing in or out. If you feel a strong resistance when installing or removing your ceramic bearing, stop immediately. You may want to make sure your bearing hole is very clean, with no glue residues before installing your bearing. If glue is necessary then you may apply a little bit of glue in the spinner bearing hole walls (never on the bearing) and try again. If you still feel it’s too tight for your ceramic bearing, do not install it on that spinner. Again, \u003c\/strong\u003e\u003cstrong\u003ewe do not offer replacements or refunds if you break your bearing!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 BEARING","offer_id":40031701106786,"sku":"","price":15.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 2","offer_id":40031701139554,"sku":"","price":29.5,"currency_code":"USD","in_stock":false},{"title":"PACK OF 5","offer_id":40031701172322,"sku":"","price":73.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 10","offer_id":40031701205090,"sku":"","price":145.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/image_44ae4360-7d2a-41e9-bbf5-8cbb24054543.jpg?v=1662979802"},{"product_id":"neutrino-9-zro2-balls-r188","title":"Neutrino - White Ceramic Body (9 White Balls) SS Cage","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eNEUTRINO\u003c\/span\u003e - 9 BALLS - ZrO2 - FULL CERAMIC R188 - STAINLESS STEEL CAGE \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNotice: \u003c\/strong\u003eAll the characteristics described below, (except for \"specs\") are based on our personal opinions only. Features such as \"speed\" or \"sound\" may vary drastically, depending on which spinner you are spinning and on each person. Please, keep that in mind once you read the characteristics below :)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHARACTERISTICS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIf compared with the Antimatter, this bearing has a softer and smoother spin quality and feedback.\u003cbr\u003e\u003c\/b\u003e\u003cstrong\u003e\u003cbr\u003e* Feedback:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSoft “metallic and glassy” feedback signature.\u003cstrong\u003e\u003cbr\u003e* Sound: \u003c\/strong\u003eSoft and very pleasant whir \"metallic \/ glassy sound\".\u003cstrong\u003e\u003cbr\u003e* Speed:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eFeels fast and lightweight.\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e* Tolerance: \u003c\/strong\u003e\"3\" in a scale from 0 - 5, being 0 loose, and 5 tight)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSPECS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003e* 9 Balls - ZrO2\u003cbr\u003e* Full Ceramic\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e* SS Double Ribbon Cage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e::\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003e\u003cb\u003eNotice 2: \u003c\/b\u003e\u003c\/strong\u003ePlease notice that we do a QC test for ALL bearings in our shop right once we receive them from the manufacturer and another QC right before shipping it to the customer. We do visual checks for marks or defects, and we check for spin quality and tolerance for every single one of them.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eWe highly recommend that you give your bearing a quick spin using your fingers or the end of a pen or straw first BEFORE you install it on your spinner so you can check the spin characteristic. We also recommend that before you install any bearing on your spinner, you always try to push it into it without using any kind of glue or adhesive at first. If it feels tight enough, then you wont need to add any glue.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eSometimes if the bearing is not installed correctly, like for example if some glue (wet or dry leftover from a previous installation) gets inside the bearing cage and balls, it can destroy the bearing or get it to sound very dirty and gritty. Make sure you are very careful when installing your bearings. You can find a step by step on how to install your bearings in the description of our 641 Bearings Glue here: \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003ehttps:\/\/unquiethands.com\/collections\/bearings\/products\/loctite-641-bearing-glue\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eNotice 3:\u003c\/strong\u003e Sometimes some bearings may present small marks or tiny dings on the edges of the races (specially for full ceramic ones due to the brittleness of the material), If you encounter small marks like nicks and dings around the edges of the races, please know that we consider that as normal since it should not affect the performance of the bearing in any way. We will never ship a bearing if the bearing has major defects like big marks or has a faulty spin and since we double QC each one, that is very very rare to happen.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eFor bearings that you may feel that are \"dusty\" or gritty, \u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003eplease use a compressed air can on the bearing while holding it with a straw. Make sure to make the bearing spin as fast as possible for around 5 seconds. That should be enough to get rid of any tiny particles, dust or lint that may be sitting between the bearing balls and cage. We do not recommend the use of liquids or soap for any bearings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2b00ff;\"\u003eBearings are consumables! They should last you many years if enough care and maintenance is given, however they may eventually stop performing well specially if they get dirty or wet for some reason. So please keep in mind that at this time, we do NOT offer refunds for bearings (unless there is clear mechanical or manufacturing fault upon receiving them) and all orders are final. If you have any questions please email us or visit our “\u003ca href=\"https:\/\/unquiethands.com\/pages\/refund-return-policy\" title=\"REFUND \u0026amp; RETURN POLICY\" target=\"_blank\" rel=\"noopener noreferrer\" style=\"color: #2b00ff;\"\u003eRefund \u0026amp; Return Policy\"\u003c\/a\u003e page.\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"1 BEARING","offer_id":40031709855842,"sku":"","price":15.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 2","offer_id":40031709888610,"sku":"","price":29.5,"currency_code":"USD","in_stock":false},{"title":"PACK OF 5","offer_id":40031709921378,"sku":"","price":73.0,"currency_code":"USD","in_stock":false},{"title":"PACK OF 10","offer_id":40031709954146,"sku":"","price":145.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/image_656686c8-3693-43d9-ac10-e6dc415fc93c.jpg?v=1663253563"},{"product_id":"grey-pocket-small-pouch-edc-storage-uqh-design","title":"DARK GREY SMALL POUCH - UQH DESIGN","description":"\u003cp\u003e\u003cstrong\u003eDARK GREY SMALL POUCH - EDC \u0026amp; STORAGE - DESIGN BY UQH\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eSPECS:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e* Around 6 cm x 8.5 cm\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e* Snap Button (covered inside, so won't touch your spinner)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e* Outer Material: Stiffened Felt Fabric\u003cbr\u003e* Inner Pocket Material: Polyester\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Default Title","offer_id":40044008538210,"sku":"","price":12.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/GreyPouchSmall_001_web.jpg?v=1663429932"},{"product_id":"dark-grey-sleeves-edc-storage-uqh-design","title":"DARK GREY SLEEVE POUCH - EDC \u0026 STORAGE - UQH DESIGN","description":"\u003cp\u003e\u003cstrong\u003eDARK GREY SLEEVE POUCH - EDC \u0026amp; STORAGE - DESIGN BY UQH\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #4d69fb;\"\u003eSPECS:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #4d69fb;\"\u003e\u003cstrong\u003e* Basic Size Around : 5 cm x 6 cm\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #4d69fb;\"\u003e\u003cstrong\u003e* Slim Size Around : 4.5 cm x 9 cm\u003cbr\u003e* Plus Size Around : 5 cm x 8.5 cm\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #4d69fb;\"\u003e\u003cstrong\u003e* Material : Stiffened Felt Fabric\u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Basic","offer_id":40044016730210,"sku":"","price":10.0,"currency_code":"USD","in_stock":false},{"title":"Slim","offer_id":40044016762978,"sku":"","price":11.0,"currency_code":"USD","in_stock":false},{"title":"Plus","offer_id":40044016795746,"sku":"","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/products\/Rockerpouch_001_web.jpg?v=1663430463"},{"product_id":"23mm-sage-buttons-fsw-brass-cu-or-ss","title":"SAGE BUTTONS - Tungsten W \u0026 CU - 23 MM","description":"\u003cp\u003e\u003cstrong\u003e23 MM Sage Buttons - W, Zirc, Ti, Brass, Copper (CU) or Stainless Steel (SS)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e* In Stock. Ships within one week.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Sage buttons are nicely dished and very comfortable. Measuring 23mm in diameter and 4mm in thickness, these buttons fit nicely not only on UQH spinners but on many other spinners from other amazing makers out there.\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eIncluded: \u003c\/strong\u003eCertificate of Authenticity (COA Card)\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSage Buttons Diameter:\u003c\/span\u003e \u003c\/strong\u003e23mm\u003cstrong\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eIndividual Button Thickness:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e \u003c\/span\u003e4.0 mm\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFull Buttons Set Thickness:\u003c\/span\u003e\u003c\/strong\u003e 13.8mm\u003cspan style=\"text-decoration: underline;\"\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cbr\u003e\u003cbr\u003eThreading:\u003c\/span\u003e\u003c\/strong\u003e \u003cbr\u003e* Dedicated thread (male and female) for all metals except Tungsten\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e* Grub Screw treading for the Tungsten version\u003cstrong\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cbr\u003eAvailable Materials:\u003c\/span\u003e\u003cbr\u003e* \u003c\/strong\u003eBrass\u003cbr\u003e* Copper\u003cbr\u003e* Stainless Steel\u003cbr\u003e* Tungsten\u003cbr\u003e* Zirconium\u003cbr\u003e* Titanium\u003cbr\u003e\u003cstrong\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAvailable Finishes:\u003c\/span\u003e\u003cbr\u003e* \u003c\/strong\u003eBeadblast (BB)\u003cbr\u003e* Polished Stonewash (PSW)\u003cbr\u003e* Fine Stonewash (FSW)\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003eButtons Weight:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eBrass: \u003c\/strong\u003e~22.2 grams\u003cstrong\u003e\u003cbr data-mce-fragment=\"1\"\u003eCU: \u003c\/strong\u003e~23.8 grams\u003cstrong\u003e\u003cbr data-mce-fragment=\"1\"\u003eSS: \u003c\/strong\u003e~20.7 grams\u003cstrong\u003e\u003cbr data-mce-fragment=\"1\"\u003eZirc: \u003c\/strong\u003e~17.5 grams\u003cstrong\u003e\u003cbr data-mce-fragment=\"1\"\u003eTungsten: \u003c\/strong\u003e~44.4 grams\u003cstrong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan\u003eNOTICE:\u003c\/span\u003e\u003c\/strong\u003e Please make sure these will fit in your spinner before purchasing. If you have any questions regarding size, just drop us an email!\u003c\/p\u003e","brand":"Unquiet Hands","offers":[{"title":"Tungsten (W) POLISHED","offer_id":41802625777762,"sku":"","price":150.0,"currency_code":"USD","in_stock":true},{"title":"Zirc PSW Flamed","offer_id":40583822606434,"sku":"","price":75.0,"currency_code":"USD","in_stock":false},{"title":"Copper FSW","offer_id":40446193533026,"sku":"","price":40.0,"currency_code":"USD","in_stock":false},{"title":"Brass FSW","offer_id":40446193500258,"sku":"","price":40.0,"currency_code":"USD","in_stock":false},{"title":"Ti FSW","offer_id":40583822508130,"sku":"","price":45.0,"currency_code":"USD","in_stock":false},{"title":"SS FSW","offer_id":40446193565794,"sku":"","price":40.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/files\/all-buttons-002_35ada62c-a393-45a6-ace7-f194d7a0640b.jpg?v=1748442812"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2170\/1903\/collections\/acessories.jpg?v=1748429804","url":"https:\/\/unquiethands.com\/collections\/spinner-accessories.oembed?page=5","provider":"Unquiet Hands","version":"1.0","type":"link"}